Average Repair Rating: 3.6 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burned out light under microwave and Filters needed changing
I just removed the multiple screws which held the hood cover on. I then attempted to remove the light bulbs from the socket. This proved impossible because the bulbs were so fragile from the heat and grease build up. To make this task much easier and probably safer, just replace the bulb housing and light bulb. The bulb housing unplugs very easily. Just replace it then screw your new bulb in. P.S. Be sure to unplug appliance before you start.
The filters are very easy to replace. No tools needed.
when removing the bulb the base broke off and there was an ark took place as I had made a mistake and didn't unplug the unit before working on it , thought with the light switch off it was ok, but still had power in that area . So ALWAYS uplug before making repairs. The whole unit was dead and I checked for power at the plug and it was live. after unpluging I took the main control panel off and discovered a fuse was blown and replaced it along with a new socket and bulb and now it works like new . the fuses are inside small plastic capsuals so I back probed them with continuity light to find the blown fuse . It was quite simple once I found how to get the panels off. Just basic common sence will take care of most appliance problems thanks Louie Scholl
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Marjorie
August 24, 2017
Need instructions to replace light bulb housing part # 8169539. The website has that info omitted part #8169539 from parts direct
For model number 66568611891
Hi Majorie,
Thank you for your inquiry. I have found a repair story from one of our customers that you may find useful,
"I removed the screws from the front and sides only. about 8 screws. I did not remove the screws in the back because I had enough room for my hands when the front dropped down. removed the plastic cover housing that protects the 2 power wires. Simply squeezed and pulled back to remove. Then removed the screw holding the housing in place which was accessed from the front just above the light socket. *** make sure you document or mark which wires go to which connector before removing the wires and make sure you test for power before handling them. If power press light button until no power. *** To much of a pain to pull stove out and unplug but that is the safest way. Then mount new housing with screw and plug in wires. Mine were white and blue. Make sure you thread wires through plastic wire cover first. and then close up bottom of micro."
I hope this helps with the repair. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Kenneth
January 18, 2023
Needed to change light bulb under microwave. Unscrewed the door, it dropped down and revealed the bulb. I tried to unscrew the bulb and it broke off, sparked. What do I do now?
For model number MMV1175JZ0
Hello Kenneth, Thank you for writing. Even when changing the bulb you should always turn power off to the appliance to avoid a harmful shock and a short to the electronic parts in the Microwave. The old Bulb may have corroded in the socket and the socket should be replaced. We hope this is helpful!
I need to replace the light socket fur the light over the stove. What is the part number and do I need anything else to replace the socket?
For model number MH1150XMS-1
Hi Mike, thank you for reaching out. The part you are looking for is the light bulb socket, part number PS389948. You may also need the screw, part number PS389895, to replace the light bulb socket. We hope this helps!
This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and should be replaced. The...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Light or Bulb","title":"Light or Bulb","url":"/Microwave-Lights-and-Bulbs.htm"},{"position":2,"name":"8169539","title":"8169539","url":""}]
