Models > FGBD2445NQ7A > Instructions

FGBD2445NQ7A Frigidaire Dishwasher - Instructions

All Instructions for the FGBD2445NQ7A
121 - 135 of 339
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Left door spring had stretched and no l held the door upright
Opened the package and inspected the new spring
Went to Part Select site to read directions
shut off the power
Reached under the dishwasher and disconnected the old spring from the frame
detached the old spring from the pulley cord
attached the new spring to the pulley cord
reached under the dishwasher and attached the new spring to the frame
Turned the power back on
total time around 15 minutes including reading the instructions
Piece of cake!
Parts Used:
Door Spring
  • John from SUNBURY, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Spray arm would fall off during the wash cycle
The spray arm is attached to a part that is screwed on. The new part came completely assembled. I unscrewed the old spray arm and then screwed the new part on. Less than 15 minutes. Works great!
Parts Used:
Upper Spray Arm
  • Farrell from NEDERLAND, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
missing bottom spray arm
I used the PartSelect repair video online to show me how to fix the dishwasher. I needed a spray arm and support. Excellent video made the repair quick and easy.
Parts Used:
Lower Spray Arm Support
  • Ashley from Normal, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old basket had a hole
Lift out old basket replace with new basket
Parts Used:
Silverware Basket
  • TIMOTHY from ELBURN, IL
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
spray arm on top broke
Just unscrewed the old one and screwed in the new one. Working great! Thanks!
Parts Used:
Upper Spray Arm
  • Kimberly from MURRELLS INLT, SC
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arm fell off during cycle
Unscrew old one and put new one in. Only issue we had was the new nut that screws the arm into place did not fit our machine. We had to take the old one off and use it instead.
Parts Used:
Upper Spray Arm
  • Dana from PATTON, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old gasket melted.
Watched installation video and followed directions. All went smoothly.
Parts Used:
Dishwasher Tub Gasket - Gray
  • Al from WOODBURY, MN
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Brass nuts holding heating element in place had split
All you have to do power down the unit, then disconnect the power connections at the element and remove the old nuts and replace them with the new ones and tighten. Don't tighten too much, the element has a rubber seal that just needs the nut to snug it up.
Parts Used:
Heating Element Brass Nut
  • Jonathan from New Hope, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Wrench (Adjustable)
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The middle button inside the upper spinner broke
It simply unscrewed and screwed back in in less than 3 minutes
Parts Used:
Upper Spray Arm
  • Libby from NEW HAVEN, CT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
upper spray arm fell off repeatedly
removed clips holding upper rack and pulled out. Simply screwed new sprayer arm in place. Replaced upper rack on track & popped clips in.
Parts Used:
Upper Spray Arm
  • Martha from HADDON TWP, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arm broke off
Very simple repair - in my case part of the upper spray arm broke off, leaving the threaded portion still in the dishwasher. Just unscrewed the remaining broken part, and screwed back in the new part.
Parts Used:
Upper Spray Arm
  • Adam from Euless, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Upper Spray arm fell off
The Upper Spray Arm is all one piece....so that was nice. You dont have to order all three pieces, like it shows in the diagram. Very easy to order and install parts.
Parts Used:
Upper Spray Arm Stop Clip
  • Tammy from Rio Linda, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
upper arm fell off frequently
Unscrewed the mounting nut and the assembly came off . A simple task of taking the new assembly and screwing it back on .
Parts Used:
Upper Spray Arm
  • Ben from Monroe, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The part would constantly fall after every dishwasher run
Removed the old spray arm by unscrewing it from the top inside of the dishwasher. Then screwed on the new spray arm. Could not have been any easier and it has not fallen off since.
Parts Used:
Upper Spray Arm
  • Anthony from Massapequa Park, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking tub seal
Just pulled the old gasket out and popped in the new. I did trim it too shrt however so be careful not to do that.
Parts Used:
Dishwasher Tub Gasket - Gray
  • Bob from Clinton, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FGBD2445NQ7A
121 - 135 of 339
Back to Top