All Installation Instructions for Frigidaire Refrigerator FFHT1826LQ9

had no shelf bin

Just snapped it on.

Parts Used:

Refrigerator Door Shelf Bin

Kasey from O'Fallon, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Hook on end of snap-on freezer bin broke.

The existing bin fell off when the hook broke as the freezer door was opened. Finding and ordering the replacement part was about as simple as it can be. Delivery time was less than a week. Replacing the bin was just a matter of snapping it in place, which took all of 5 seconds.

Parts Used:

Freezer Door Bin

Benton R. from Elkton, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My door shelf broke where the tabs connect to the door

I slid and locked the new shelf in place, easy!

Parts Used:

Refrigerator Door Shelf Retainer Bin

Jesse from Edmond, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Evaporator was freezing up and was running non stop

I tested the components in the refrigerator defrost function. I used digital multimeter and checked for continuity. Defrost thermostat must 32 degrees or lower.

Parts Used:

Defrost Thermostat

James from PHILADELPHIA, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Just bought a condo and fridge door bin was missing.

Looked up model number online and found this site . Prices were reasonable and ordered the bin. It snapped right into place.

Parts Used:

Refrigerator Door Shelf Bin

Chasya from SCOTTSDALE, AZ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

shelf bin retainer had broken off

snapped the new bin shelf in and we were finished

Parts Used:

Refrigerator Door Shelf Bin

Michael from YORK, PA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

clip that held shelf bin in broke off

opened box that part came in snpped it in place

Parts Used:

Refrigerator Door Shelf Bin

james from BEECH GROVE, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

a chip broke off the shelf at the "cliparea"

Snapped right into place

Parts Used:

Refrigerator Door Shelf Retainer Bin

E from FORT WAYNE, IN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Freezer worked, refrigerator didn't. Ice build up on coils.

Unplugged refrigerator. Emptied freezer and removed ice maker and cover, need to unplug fan. Defrosted coils with hot water. Cut wires to thermostat as close to it ad possible to leave extra wire in case of an error. Stripped wire in new thermostat and put in shrink plastic then the wire crimp connector joining both light blue wires making sure wires were in before crimping them. Repeated with other dark blue wire. After used the heat gun to shrink the protective white tubing. The only thing i found not satisfying was tge tubing. It was too wide and too small. When i shrunk it did not cover the whole connector and was loose. I had to use a glue gun to cover both ends of each wire connector. Hope this helps other users.

Parts Used:

Defrost Thermostat

Salvador from SANTA ANA, CA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Coils frozen over. Refrigerator not cooling

I cut wires from bad thermostat and removed it . Stripped wires and crimped connectors on new thermostat and wires from old thermostat. Used heat gun to seal sleeves over connectors. Very helpful video from this site Thanks, you will be my go to parts supplier from now on!!!!!!!!!!!!

Parts Used:

Defrost Thermostat

Robert from MONTGOMERY, IL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The door shelf bin had broken.

I took the part out of the box, opened the refrigerator and snapped the door shelf bin in place. Job done! Less than 5 minutes. I'm a 68 yr old women and did it by myself. Thank you. The price was excellent and I will definitely use your services again if/when needed.

Parts Used:

Refrigerator Door Shelf Bin