All Installation Instructions for General Electric Dryer DMCD330GJ1WC

Drum would not turn

Exactly how your perfect video instructions showed me. Thank you for a job well done!

Parts Used:

Drive Belt

Jeff D from NEW MEADOWS, ID
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Squeaky dryer

I followed the YouTube video and it gave me step by step instructions however I really needed to replace my dryer slides to fix the problem.

Parts Used:

Rear Drum Bearing Kit

Shelly from MURFREESBORO, TN
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

door filter

was no repair- removed filter from door and installed new filter into door. No tools required.

Parts Used:

Lint Filter - White Frame

victor from ST AUGUSTINE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Door handle broke

Called my son-in-law. Easy as pie

Parts Used:

Door Handle - White

Cheryl from WILDER, KY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Dryer needed a new dryer belt

I followed the directions I found on my tablet on youtube.

Parts Used:

Drive Belt

Cindy from EPHRATA, PA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

take the old dryer lint screen out

Hand replace

Parts Used:

Lint Filter - White Frame

Dave from EDGEWATER, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

metal on metal swealing

removed rhe control panel, 4 torx screws. removed top of unit 2 philips screws , lifted out of the way ro get to front panel . 2 more torx screws ro get front panel off then juat a matter of changing out worn parts & reassembling dryer unit took maybe an hour thing runs great now

Parts Used:

Dryer Lint Chute Assembly

Front Drum Bearing

KURT from CEDAR RAPIDS, IA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

No power to dishwasher

Replace both micro switches.

Parts Used:

Interlock Switch

Robert from OLD TOWN, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Popped in the new lint trap . Easy peasy

Pull the old lint trap out. Slid new one in

Parts Used:

Lint Filter - White Frame

David from MIDDLETOWN, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My last phase of repairs of minor items.

if your unit has over 6,000 hours of operations, one needs to remove the front panel and inspect the sliders that the drum rides on. The video were very helpful to replace the sliders. Unfortunately, my dryer had over 10,000 hours of operations over a 30 years period, hence a major repair costing over $200.00 dollars. The drum sliders were gone, hence the drum eat through the plastic guides. More so, the drum started to eat away the front panel. If the dryer is eating your closes and making a noise, one is looking at a $200.00 repair job. Hence check the sliders early will save one $$$$.

Parts Used:

Dryer Lint Chute Assembly

Edward from EDGEWATER, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Switch not working.

Open the door and removed the part. Installed the new part and started the dryer.

Parts Used:

Door Switch

Alan from BELFORD, NJ
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

No flame. Igniter came on but no gas.

Opened up dryer for access to all components and tested. All checked good. Put back together and tested and igniter came on but no flame. Purchased two new coils and tested again. No flame. Purchased complete valve assembly and replaced old one. Tested again and viola, success! TY PartSelect for exact replacement part.

Parts Used: