All Installation Instructions for Amana Dishwasher ADB1100AWS2

The Detergent dispenser was broken.

Replaced the detergent dispenser using the directions on the shipping notice.

Parts Used:

Detergent and Rinse Dispenser with Cap

Carol from Pipersville, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

water not heating,dishes not drying

My husband did this. He turned the dishwasher upside-down, disconnected the wires,and unbolted the heater.He put in the new heater (bolted,wired) and tested the current. Voila!

Parts Used:

Dishwasher Heating Element

Marie from Hollywood, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

element not working

laid dishwasher on its side and unscrewed element. returned unit upright & replaced element. reversed process and reinstalled unit under cabinet

Parts Used:

Dishwasher Heating Element

Michael from Springhill, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Develeoped a leak on the bottom.

Pulled dishwasher out of compartment, removed all parts underneath. removed inner parts, removed pump assembly. Installed new pump assembly and grommet. Reassembled in reverse order, test ran and unit was operating normal and no leaks.

Parts Used:

Grommet

Eladio from LOGAN, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Front Track stop missing

Snap new track stop into place. Took a few minutes to figure out top/bottom and inside/outside, but no issues

Parts Used:

Rack Track Stop

Tim from GLADSTONE, MO
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Old cap came loose, fell onto heating element. End of story.

Bought the new cap, took it out of package, installed.

Parts Used:

Dispenser Cap

Raymond J from MOKELUMNE HL, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Heat element was cracked

Pulled dishwasher out unplug the wire on each side unscrew the nut on each side lift up in the back of element pull it out on metal holder for element and put the new one in really easy thanks so much for the help!!

Parts Used:

Silverware Basket

Dishwasher Heating Element

TIMOTHY from OTSEGO, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

I can not get the part to fit and stay in place.

It is a small plastic piece which serves as a stop on the right side of the upper rack. It is the correct part because it is identical to the left one of the same type. I tried clamping down with a pair of pliers but I am afraid of breaking it. With shipping this two inch piece of plastic cost $20, so I do not want to crack it. I am at a loss as to how to sit in in place.

Parts Used:

Rack Track Stop

Marilyn from TRINIDAD, CO
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

none

removed and installed cords with screw driver

Parts Used:

Power Cord Kit

Ronald from VAN BUREN TWP, MI
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Water filter needed replacing

The old filter simply unscrews and the new one screws in.

Parts Used:

Dishwasher Filter

Martha from SAN DIEGO, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Someone had used the wrong type of power cord

Recently bought a whirlpool dishwasher, the dishwasher was converted to a portable dishwasher and they did not use the cord application power cord so they machine was blowing our breaker, instructions were very simple and installation was easy!

Parts Used:

Power Cord Kit

Jonathan from DOWNS, KS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Element was no longer working. Dishes were not drying.

Watched a video and seen how easy it was to repair. Just disconnect the power, water and return drain. two bolts and replace element . The difficult part was removing and replacing the dishwasher...piece of cake.

Parts Used:

Dishwasher Heating Element

David from DEVINE, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench (Adjustable)

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

cut wire in center sprayer to remove plastic holder for new basket

after that every thing went very well

Parts Used:

DISHRACK

JOHN from IONIA, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Heat dry not working. Heavy duty cycle not working.

Remove front top panel. Unplug 4 sets wires. Remove control panel with tiny wrench socket. Install new control panel. Reattach wires & replace tip front panel.

Parts Used: