All Installation Instructions for Kenmore Refrigerator 25370633411

ice maker will not make ice

Installed new fill valve in less than 30 minutes and waited for 24-8 hours for results to no avail. Ice maker mechanism was shot and still would not work. Went to Lowes and bought entire ice maker add on kit for my model ice box and installed in 30 minutes and have been making ice ever since. Your 99% cure rate was 100% incorrect. Save the time and effort and go to a big box store and just get a new ice maker. By the way, it only costs about $20 more to do that.

Parts Used:

Water Inlet Valve

Frank from Glen Allen, VA
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

shattered bottom shelf (crisper shelf)

Simple drop-in. No tools. Less than one minute "repair" time. Worrying that the glass would break en route was for not; huge box with lots of peanuts and bubble wrap prevented any potential breakage. Very satisfied with price, shipment (including time), and overall "repair".

Parts Used:

Crisper Glass Shelf Insert

WENDY from MONTROSE, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

There was not a full shelf in freezer area.

The shelf fit perfect right out of the box. I just snapped it into the holes provide. Could not have been easier.

Parts Used:

Freezer Shelf

Olivia from Warren, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Water Tube That Fills Ice Maker Leaking Water

Undone the water line that comes up the back of the refrigerator and pulled the water tube out the back of the refrigerator and reinstalled the new one and reinstalled the water line. Done

Parts Used:

Water Tube

PAT from BATON ROUGE, LA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Thank you for voting!

The glass shelf crashed and burned.

It was as easy as pie. We just carefully slid the shelf into place. That was it.

Parts Used:

Crisper Glass Shelf Insert

Bia from Rochester, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

crisper glass shattered while cleaning

Insert new glass into slot. Took less than 2 minutes.

Parts Used:

Crisper Glass Shelf Insert

Admirald from North Lauderdale, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

crisper glass broke in thausand peaces

it was easy my wife did it wen i went to the fridge it was already installed. thank you!!!!

Parts Used:

Crisper Glass Shelf Insert

Alejandro from Auburn, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

The crisper glass shelf shatter when trying to clean it.

The repair, if you want to call it that, was a complete no-brainer. The glass slipped right into the shelf. No tools were needed. I was afraid that the glass might break during shipment. However, it was packaged and secured several times over that it was in no danger of breaking during delivery. The part came sooner than I anticipated. I am extremely pleased with this order.

Parts Used:

Crisper Glass Shelf Insert

Leslie from Staten Island, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Freezer door sagging due to warped hinge

Just block the door up so it doesn't fall off, remove the two screws, replace hinge, and replace screws. My wife could have done it. Metal replacement part is much better than the original plastic that warped from day one.

Parts Used:

Upper Hinge

Keith from Springfield, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Ice Maker not getting any water

1). Shut off water supply to fridge. 2). Move fridge out to gain access to back of fridge. 3). Remove poly line to water tube have a glass handy to catch any remaining water that might be in line. Some may have a foam insulating washer around water tube remove it first. 4). My Sears-Kenmore was a twist lock water tube have to turn it to left or right depending on brand to remove tube. 5). After removing make sure tube didn't just have water frozen in tube ( that was my problem ) run it under hot water frozen piece will come out. 5). Problem fixed, reverse directions to re-install tube!

Parts Used:

Water Tube