25360609411 Kenmore Refrigerator - Instructions

Remove from box snap into place about a 90 sec. job

put new shelf in, no problem!

Changed out shelf rack on the door of the refrigerator.

New door shelf bin attacched to refrigerator door brackets

Snapped it into place. Beautiful!

I took the old shelf off and slipped the new one on. THAT WAS EASY!!!!!
Ordering was easy also. Thank you

ok, this could not have been easier. The part just snaps into place, so no tools were needed. However! Partselect saved me an hour-long drive and a couple of bucks. I called the 800 number on the fridge ID tag, and was all set to drive 45 miles to the nearest Frigidaire dealer in Fayetteville for the part. Then I decided to check online. Partselect had the part and it cost about $2 less. There was no doubt it was the right part because they provide what appears to be the engineer's sketch of the fridge or the actual diagram from the owner's manual (which we do not have). Anyrate, it arrived 2 days later. Why aren't all repairs this easy?!

Inserted the new shelf. Very easy job.

Snapped in the new shelf in about a second. Very easy and a great company for service.

Very easy to install. The shipment arrived in less than 5 days and the refrigerator door shelf bin was a perfect fit.

The broken shelf was easy to remove and the replacement was as easy to replace. The repair took less than five minutes.

The repair was so easy I couldn't believe I had lived with the taped shelf for as kong as I did. No tools required, just simply, put in place and snap in. Just great!!!

The repair was really easy. All I had to do was snap the shelf bin in place without the use of any tools! I will definitely use PartSelect again. I got my bin in two days and that is because I ordered it the day before Thanksgiving! Thank you PartSelect!

Part: PS429868: Refrigerator Door Shelf Retainer/Bin - White;

Not too bad. I couldn't get the part to fit in the slot for the top door shelf (was somewhat gentle not wanting to crack the part I just received). I moved the second door shelf to the top slot. That fit, no problem. Then took the received part and slid it into the slot for the second shelf. It took some wiggling but it fit. All OK.

I opened the box, looked at the part, and inserted it in the door in the appropriate place. That's it! Easy, fast, and exactly the the right part. No Problem.