Models > 25344393409 > Instructions

25344393409 Kenmore Refrigerator - Instructions

All Instructions for the 25344393409
121 - 135 of 382
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
IT WAS MAKING A POPPING NOISE WHEN YOU OPEN THE DOOR
I REMOVE THE TOP COVER AND PLATE KEEP DOOR CLOSE TO HOLD IN PLACE THEN LIFT THE DOOR OFF REMOVE THE SCREW IN CLOSER PLATE REPLACE NEW ONE POP OUT BEARING IN DOOR WITH SCREW DRIVE REPLACE THE NEW ONE REINSTALLED DOOR EASY REPAIR.
Parts Used:
Door Closing Cam Hinge Bearing
  • Johnnie from GRENADA, MS
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice maker doesn’t work
Open freezer
Pry the switch out (bottom first, then push the tab on top while prying out)
Move wires to
New switch
Push switch in
Test
Parts Used:
SWITCH-LIGHT
  • Ville from SAN JOSE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the closer plate was cracked and caused the door to catch and make a popping sound.
the repair was so easy to do. it did take 2 of us to handle the door removal and reinstallation. we watched the video and carefully removed the door and had no trouble at all with the new parts installation. we knew what to expect and successfully fixed the frig! Good Deal!! Easy fix!!
Parts Used:
Door Closing Cam Hinge Bearing
  • Cathy A from HAMILTON, MT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I dropped and broke the glass coveriing the pan while cleaning the fridge
Took the part out of the box and slid it in to place. It fit perfectly!
Parts Used:
Pan Cover Insert
  • JOHN from HELOTES, TX
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
LEAKING WATER valve
very easy, make sure to watch the provided you tube video.
Parts Used:
Refrigerator Water Inlet Valve
  • Rene from DIAMOND BAR, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Wrench (Adjustable)
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The ice crushing housing was broken.
The repair went easily after watching the video, took me less than an hour to complete the repair.
Parts Used:
Dispenser Crusher Housing
  • Les from LIVERMORE, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door would close without force
replaced the lower cam on door. removed upper hinge lifted off door and pulled out old cam and replaced it.
Parts Used:
Hinge Bearing
  • William from PLAINVILLE, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The center of the plastic auger drum was broken
Had to replace with a whole new part, had to take it all apart to replace
Parts Used:
Ice Dispenser Drum
  • Laura from Westville, OK
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
when refrig door open it made a "clicking" noise.
The noise was made due to a loose part. I took the refrigerator door off and replaced the closer plate and hinge bearing. This solved the problem.
Parts Used:
Door Closing Cam Hinge Bearing
  • mark from Los Angeles, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
ice maker shorted out
love this super easy remove two screws and replace thank you
Parts Used:
Rear-Mount Ice Maker Assembly
  • ALAN from SARATOGA, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
5 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door glide broke and door was hard to shut
it took longer to remove the food and all from the door than the repair. It was a very simple repair. two bolts to take the top hinge off, pulled the door off and set on counter, removed old, broken glide, slid new one in. I ordered both sides, but the closer plate was in great condition, so I didn't use it. put the door on, then the top hinge and now it shuts like new. total time to fix (minus taking the food out of the door and putting it back in) was about 10 minutes.
Parts Used:
Hinge Bearing
  • James from Franklin, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The refrigerator door made a loud clicking noise when it opened and closed.
We took the door off the hinge which invovled removing the top screws on the door. The part that broke split in two pieces leaving the shank inside the bottom of the door hinge. The most challenging part of the repair was pulling that piece back out since there was very little to grab on to. Once we got that out it was easy to replace with the new piece.
Parts Used:
Hinge Bearing
  • Arden from Hainesville, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The refrigerator door popped when opened past 90 degrees.
This was an easy repair. I had already read about the same problem from another of your customers and followed his directions. But more remarkable than the ease of the repair was how quickly I received the part. I ordered the part, using standard delivery, at approximately 2:00 on Thursday afternoon and received it the next morning and had the refrigerator repaired within 24 hours of ordering the part. That's service.. Thanks
Parts Used:
Hinge Bearing
  • Dale from Marion, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken freezer shelf (Glass)
Replaced shelf
Parts Used:
SHELF-GLASS
  • Jack from Fayetteville, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn out bearing
Unscrewed tye top door bracket lifted off the door and popped on new bearing takes minutes to do. Takes more time to empty thenshelves beforentaking door off
Parts Used:
Door Closing Cam Hinge Bearing
  • Robert from WAYNESVILLE, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 25344393409
121 - 135 of 382
Back to Top