Product Description
Broil Element - 4000W Specifications
This broil element is found on the roof of the oven.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Range Broil Element - 4000W
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Little to no heat when broiling
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Crosley, Kenmore, Electrolux.
Part# 316430900 replaces these:
AP3776987, 1062589, 316206800
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Carlos R - September 18, 2022
Verified Purchase
Great service and support.
I have ordered other parts before as well. The service is fantastic and delivery was fast and in great condition. What I think is even better is the fact that I was able to diagnose the problems I had with the stove as well as my fridge based on the videos and comments from people like me. And, I installed all the parts myself saving a considerable amount of money. I also know nothing about appliance repair. I can’t say enough about this company.
ROBERT K - January 5, 2022
Verified Purchase
Great part fro part select
We received the element very quickly and installed it next and it is working great good part good service and great vodeo to help install part
Emma T - December 11, 2021
Verified Purchase
Easy repair part fit perfectly
Honestly I cannot begin to explain how easy this was, starting from using your website and having it confirm that the part would indeed fit took a load off my shoulders. I am a 24 year old first time renter alone LOL with no tools or handy skills when my oven broke. The part arrive quickly and I watched the video listed on the website and did this all myself with the help of a girlfriend to help me hold up the element as I screwed it back in. If I can do this you can too! The oven works and yes it did smoke and smell briefly >1min of first turning it on but went away quickly and now is just like new. Thank you all so much for helping me !!!
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Odor when range turned on.
Unplugged unit and removed back panel with nut driver. Removed door, racks and unscrewed element braces from back of unit. Removed element and installed the new one. Reversed the process and then ran the unit through a preheat cycle to test it.
Other Parts Used:
-
Garry from Morganton, NC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
9 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
top elment didn't heat
turned power off at fuse box took of back panel about8-10 nuts unhooked wires with pliers that went to element then took2 nuts out that held element up and 2nuts holding element took out and put new one in works great
Other Parts Used:
-
gail from SIOUX FALLS, SD
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Element burned out
Turned off power at breaker, took back off range, removed red and blue wires, removed oven door, removed two screws holding in broil element, removed wires supporting old element, installed new element and reversed procedure.
Other Parts Used:
-
Stephen from AUGUSTA, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
June 27, 2019
Oven only heats up to 250 when set for 400 already replaced the sensor probe on the back does the broiler element control the main heat and does it need to be replaced
For model number Frigidare LGEF3045KFK
Hello Dan, thank you for your question. If the sensor probe was replaced but the unit still won't heat up correctly the electronic board would have to be replaced. The bake and broil elements do not control the main heat, the board and the sensor does. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Bert
October 2, 2019
If heating elements pass continuity test, does that mean that they're ok?
For model number LGEF3045KFK
Hello Bert, thank you for your question. Yes, if the elements show continuity they are ok. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Paul Cortright
October 24, 2019
Broiler element test good but when put control on broil element won’t heat. Test wires and they show voltage going to the element
For model number Lgef3045kf
Hello Paul, thank you for your question. If the element tested ok but the element will not turn on when you select the bake option the electronic board should be replaced which is Part Number: PS9494055. I hope this helps!
Was this helpful?
Thank you for voting!
Robin
July 8, 2021
My broil element has 120 volts going to it and through it. But does not get hot after minutes of it being on its still cool to the touch. It tests about 14.6 ohm. Is it a element or board issue
For model number CGEF3055MFE
Hello Robin, Thank you for the question. The Broil Element should read between 20 to 40 ohms. We hope this helps!
Was this helpful?
Thank you for voting!
DJ
December 13, 2021
OVEN ONLY GETS UP TO 200 AND THATS IT
For model number CGEF3055KFA
Hello Dj, Thank you for the question. We suggest testing the Oven Sensor with a Multimeter. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
TIM
November 9, 2022
HOW DO YOU CHECK THE HEATING ELEMENTS ,BROIL AND BAKE ? BY OHMS ? have replace the temperature sensor.
For model number FPEF3081KFC
Hello Tim, thank you for contacting us. Turn the multimeter to the lowest ohm settings. Connect its two probes to the terminals of the heating elements. A good element should give a reading in the range of 10-75 ohms. If the reading does not change or is out of the normal range, the element is likely to be defective. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Was this helpful?
Thank you for voting!
Ben
March 7, 2023
My oven hit the F10 over-heat code so I unplugged it and let it cool down. turned on and cycled again to find that the top element only in the oven was not shutting off when the desired temp was reached. I will check resistance of top element when I get home but I think I need to replace that element, your thoughts?
For model number GLEFZ384GCA
Hi Ben, thank you for reaching out. According to our research, you need to check the oven temperature sensor, part number PS1528542, to fix this issue. First, test the temperature sensor for continuity with the multimeter to check if it's working correctly or not. There should be a resistance value between 1000 to 1100 ohms to be working correctly. Otherwise, the sensor is defective and you need to replace it. Additionally, if the issue still persists, then there may be an issue with the control board, and you need to replace the control board, part number PS2378933. We hope this helps, good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS978285
Manufacturer Part Number: 316430900
Manufacturer Part Number: 316430900
Brand
Model Number
Description