Tine Retainer/Clip
Fits your PDW9800N20BB!
$21.88
Special Order
Fits your PDW9800N20BB!
PartSelect Number
PS958927
Manufacturer Part Number
WD12X10117
Manufactured by
GE
Product Description
Tine Retainer/Clip Specifications
Used to hold the tine row or combs in place on the dishwasher rack. *** Sold Individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD12X10117 replaces these:
AP3794258, 1088487
Customer Repair Stories
Average Repair Rating: 2.9 / 5.0, 2 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Control module went out - causing the heating element to super heat, melting several of the plastic interior parts
I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.
Other Parts Used:
Sump Filter and Cover
Dishrack Rollers and Axles - Kit of 8
BASKET ASM SILVERWARE
Dishwasher Detergent Dispenser Pump
Upper Spray Arm
MODULE CONTROL Assembly
DOME FLOAT
Tine Retainer
Fine Filter
Screw 8-32 B HXW 1.13 Stainless Steel
Upper Spray Arm Bearing
Fine Filter Hub Nut
Lower Spray Arm Bearing
-
Mark from Omaha, NE
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
31 of 191 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All the wheels on the lower rack of the dishwasher were going bad
We took off the old wheels, pushed the axles into the new wheels, then installed onto the lower rack. Works great, slides beautifully!
Other Parts Used:
-
Theresa from St. Anthony, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
July 24, 2017
Item 698 (wd12x10117) is this the clip that allows you to keep the tines held upright or fold them down?
Hi Ron,
Thank you for the question! Yes the PS958927 item #698 on the diagram is the clip to hold the tine rows in place and allows them to fold down.
Thanks again for your great question!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Donna
December 11, 2018
The clip that holds the tines up broke on my GE profile dishwasher. I ordered the following: Tine retainer clip part #ps958927. Will this work? Thank you
For model number PDW8680J01SS
Hello Donna, thank you for your question. There are lower rack tine clips which are part numbers WD12X10116 and WD12X10117. The upper rack tine clips are part numbers WD12X10116 and WD12X10118. I hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS958927
Manufacturer Part Number: WD12X10117
Manufacturer Part Number: WD12X10117
Brand
Model Number
Description