Product Description
Tine Retainer Specifications
This dishwasher retainer connects to the removable tine.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD12X10116 replaces these:
AP3794257, 1088486
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Philippe G - August 23, 2018
Verified Purchase
Easy fix
Easy fix for my dishwasher
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Control module went out - causing the heating element to super heat, melting several of the plastic interior parts
I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.
Other Parts Used:
Sump Filter and Cover
Dishrack Rollers and Axles - Kit of 8
BASKET ASM SILVERWARE
Dishwasher Detergent Dispenser Pump
Upper Spray Arm
MODULE CONTROL Assembly
DOME FLOAT
Tine Retainer/Clip
Fine Filter
Screw 8-32 B HXW 1.13 Stainless Steel
Upper Spray Arm Bearing
Fine Filter Hub Nut
Lower Spray Arm Bearing
-
Mark from Omaha, NE
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
31 of 191 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
lower rack wheel retainers broke an the wheels fell off
put the new retainers on the wheels then installed them back on the rack.
Other Parts Used:
-
Thomas from Louisville, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
6 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced Middle Spray Arm
Took me 15 min to repair. Part was diffrent origanal different than origanal very easy wish diagram on website was easier to understand. Wish u new part was different from origanal. But for the most part dishwasher is pretty simple to replace parts
Other Parts Used:
-
Sean from Zillah, WA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All the wheels on the lower rack of the dishwasher were going bad
We took off the old wheels, pushed the axles into the new wheels, then installed onto the lower rack. Works great, slides beautifully!
Other Parts Used:
-
Theresa from St. Anthony, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rachel
December 28, 2019
I got the 4 retainer combs, but they came with no screws to attach them to the lower dishwasher rack. I'm very disappointed. It's a hassle for an amateur like me to figure out what screw would match. And a screw would seem like a cheap enough item to include in the package.
For model number WD12X10116
Hello Rachel,
Thank you for your question. The tine retainers do not require a screw to attach to the tines, they just simply push on the tines themselves. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rachel
December 28, 2019
I need a direct link to the installation video. I somehow found it before, but got my part in the mail and would like to see the video again. Can't find it on the site.
For model number PS958926
Hi Rachel, you will have to copy and paste this link into your browser, https://www.youtube.com/watch?v=64OjlBlk_tQ. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Kelley
July 16, 2019
Will this part fit my fridgidaire galleery
For model number FGID2474QF0B
Hi Kelley, thank you for your question. Unfortunately it would not. The part you are requesting on has been discontinued and we have no known replacement listed in our system. We have no further information. You are welcome to contact the manufacturer of the part to see if they have recently released a new substitute. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Sharon
January 22, 2020
GE profile triton dishwasher
Top rack small clip that lets the rack slide in and out is broke and we only need one. This small clip is light colored plastic
For model number GSD5940F00SS
Hello and thank you for writing.
We believe you are referring to part rack slide end cap # PS2370502. Please let us know if you need any further assistance. We hope this helps. Please contact us anytime
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS958926
Manufacturer Part Number: WD12X10116
Manufacturer Part Number: WD12X10116
Brand
Model Number
Description