Left Front Orifice
Fits your JGBP25WEL4WW!
$42.24
Special Order
Fits your JGBP25WEL4WW!
PartSelect Number
PS954084
Manufacturer Part Number
WB28K10190
Manufactured by
GE
Product Description
Left Front Orifice Specifications
This is the replacement left front orifice for your gas range. When your range is operating, gas flows through the orifice to the igniter. This part is the orifice itself as well as the metal holder that holds it in place. If you notice a gas smell when your range is on, you could have a loose or damaged orifice. This part fits the front left burner in your range, so make sure you are replacing the correct orifice. This is an OEM part sourced from the manufacturer and is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Gas smell
This part works with the following products:
Range.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WB28K10190 replaces these:
AP3775376, 1086493
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
loss of spark to two burners, and bent orifice holder
unplugged the old spark module and plugged the new one in. Disassebled and reassembled the new orifice holder.
Other Parts Used:
-
Kimberly from Leavittsburg, OH
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
12 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front orifice tube broke
The repair went easy the tube was a perfect fit
Other Parts Used:
-
craig from unadilla, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set, Wrench set
4 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken lines
-
David from BONSALL, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no problems it was very easy the parts were a perfect match
first you have close the main gas line, then you remove the nut in the center of each burner then you have to push in the two tabs located in the front part of the stove. one on each side of the out side burners. then you lift the top of the stove. then you will need a wrench to loosen the nuts on the tub. then you have to line up the new ones. put the stove top back on then you have to put the nuts on each burner then you can test for gas leaks
Other Parts Used:
-
Luis E from HANOVER PARK, IL
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set, Wrench set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Derrick
December 23, 2017
I recently installed a new igniter. When I preheat to 325 degrees I smell gas. What part needs replacing to remedy the gas smell?
For model number RGB790DET1BB
Hello Derrick,
Thanks for your question. You may also want to test the flat-style oven igniter with a multi-meter to see if it has continuity, and replace it if it is not showing continuity. We would also advise to clean the manifold assembly and check if there are any cracks or leaks with the pipes. Be very cautious not to use any open flames around the oven.
I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Richard
July 29, 2021
Item ps954084 left front orifice. Is this the tube and orifice and is the orifice for natural gas or lp
For model number Jgbp33weh3ww
Hello Richard, Thank you for the question. This is the Left Front Orifice and tube assembly for Natural Gas. We hope this helps!
Was this helpful?
Thank you for voting!
Joseph
February 26, 2022
I am looking for a orifice tube for a stove, I do not see one listed. I know this may sound stupid how do you tell left from the right looking from the front to back or do you look from the back to front for L/R. Thank You
For model number RGB533WEH5WW
Hello Joseph, Thank you for the question. It will be your left or right as you stand in front of the appliance looking at it. Please submit a new question letting us know what part you need and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS954084
Manufacturer Part Number: WB28K10190
Manufacturer Part Number: WB28K10190
Brand
Model Number
Description