Product Description
Door Spring Kit Specifications
This kit includes 2 spring and 2 cables. This door spring kit is for dishwashers.
Door spring kit applies tension to the dishwasher door through the door hinge to prevent the door from dropping too quickly when you open the dishwasher. The kit may include multiple parts; refer to your parts diagram for a list of parts included.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Door won’t close
This part works with the following products:
Dishwasher.
This part works with the following products:
Bosch, Thermador, Gaggenau.
Part# 00754866 replaces these:
AP5804978, 00623540, 00627230, 00659339, 00751392, 623540, 627230, 659339, 751392, 754866
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Robin Z - 19 days ago
Verified Purchase
Worked as expected
The part arrived amazingly fast. I live in a rural area & the part arrived within 2 days. The installation was also relatively simple. Look for Youtube videos if you need help. It is good to repair only 1 side at a time so you can refer to the other side if you need to see how the parts connect. The door works like new again.
Jean-Raphael C - April 18, 2024
Verified Purchase
Easy to install, better than the original part
Instructions came with the new springs. Super easy to replace. The new springs have a metal bracket that looks stronger than the previous plastic piece. Very happy with the parts! Saved a lot of money. Would recommend! Thank you!
Al P - September 3, 2023
Verified Purchase
Very easy to install
Part was easy to find and arrived earlier than expected. Took no time to replace both springs. I am expecting many more years of reliable service from my dishwasher. Glad I didn’t call the service tech.
Adam S - May 23, 2023
Verified Purchase
Bosch Dishwasher Door Springs
Delivery of the parts was incredibly fast. Parts fit perfect and the entire job did not even take 30 minutes to change both door springs. Would give 10 stars if possible
Bert W - March 24, 2023
Verified Purchase
Easy repair , good parts ,arrived fast
Great replacement part , easy repair , up and running again quickly
Eric C - March 2, 2023
Verified Purchase
Excellente pièce de qualité!!
Merci!!
James M - February 4, 2023
Verified Purchase
Bang on. Didn't disconnect anything
Turned water off under sink. Took me less than 30 mins all in. I'm handy, but it was an easy job.
Craig M - February 1, 2023
Verified Purchase
Better than the original.
The parts were great. It is a shame the original did not have the metal catch. Easy to install. Should not break now for quite a while.
William R - November 17, 2022
Verified Purchase
Dishwasher door spring kit
The part was as expected, installed well and works fine.
Andrée- P - October 24, 2022
Verified Purchase
right item easy to install
delivery of the good were received a little bit longer than expected. Was not easy to track the pacakage on Purolator web site. All the informations were missing from Montreal to Sept-Iles.
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 10 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Spring mechanism failed and shattered tab that was part of base frame.
I could not decipher whether repair parts kit was exact original or modified by Bosch. Ordered kit 754866 and found it contained exactly what I needed. The kit added a metal tab to springs that fit next to broken tab in a slot in the base frame. They were tapped into place with a small hammer per directions that came with it. Rest of task was relatively simple.
Other Parts Used:
-
James from NEWHALL, IA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
9 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher door spring counter balance broke
EASILY replaced spring. Pulled dishwasher out to expose broken spring; lightly tapped in new spring into slot using rubber mallet; used pliers to pull plastic thingy over door bracket.
Watched YouTube video first. Easy fix!
Watched YouTube video first. Easy fix!
Other Parts Used:
-
Laura from NEW BERLIN, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
8 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher Door Opens Too Fast
I watched a YouTube video on this but ending up not needing to follow it too closely. I have a granite counter top, so no need to remove any screws on the top lip of the dishwasher. I also had a very long water hose, drain hose and electric cord, so I could pull the dishwasher out without disconnecting or turning off anything. All was left was to remove the sound insulation from the top (be sure to get it back on like you took it off) and then take the old springs out. They were kinda stuck in there but even if you get some plastic coming with them, there is a slot for the new replacement spring to be hammered back in. Hammer the spring back in (I used a brass hammer) and route the cord back up to the latch for the cord. Make sure you don't get it upside down or you may get a noise when it hits the metal. If there is a sharp bang when the door closes, you need to turn the plastic clip over. Usually only one side will break first and you can use the other side as a guide on how things should fit. Using needle nose pliers, reconnect the plastic end (opposite the spring) back into the steel clip (do this with the door shut). Do the same to the other side and you are finished. Make sure the door operates well with no noise before you slide it back in. The spring kit I got was PN PS8770519 for my Bosch Dishwasher which is 19 years old, I assume that iy came with the house and that's how old the house is. Easy
Other Parts Used:
-
Kerry from WESTMINSTER, CO
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
6 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Be careful to anchor the spring carefully
I disconnected the water, power, brackets, and drain and then slid out the washer. Replacing the springs and related cords is easy in and of itself. Common sense will tell you how to do it once you see it. Each spring comes with a metal retainer(?) which has to be removed prior to installation. Why it is there is a mystery. The old spring does not have it, and the new "Cord" will not attach to the old spring so you have to replace it to fit the new "Cord." I also took the opportunity to replace the water line and valve.
The disappointment came with one of the springs. One end of each spring is held in place by the plastic side frame, which in one case was in the process of disintegration or perhaps damaged in original manufacture. In any event, the plastic let-go and the new spring shot forward into the "Guide" (part 0528) and broke it in two. I have ordered new "Guides" but I will have to fabricate some way to attach the spring to the plastic frame. I hope you don't have to go through that. So be very careful replacing the springs.
The disappointment came with one of the springs. One end of each spring is held in place by the plastic side frame, which in one case was in the process of disintegration or perhaps damaged in original manufacture. In any event, the plastic let-go and the new spring shot forward into the "Guide" (part 0528) and broke it in two. I have ordered new "Guides" but I will have to fabricate some way to attach the spring to the plastic frame. I hope you don't have to go through that. So be very careful replacing the springs.
Other Parts Used:
-
Michael from Mission Viejo, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Wrench (Adjustable)
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher door spring broke
This was an easy repair to make on this model of Bosch dishwasher with this kit. I watched a YouTube video describing this repair before I purchased the parts, and I didn’t have to go through many of the steps described in the video. I began by removing the two screws holding the dishwasher under the countertop and eased it out from its enclosure. The rope with the broken plastic clip was easy to find on one side of the dishwasher without removing any shields or having to flip the dishwasher on it’s back. I removed the old spring, attached the new rope and plastic clip to the new spring, routed the rope around the pullies and pushed the new spring in place. I did the same thing on the other side while it was out. I also spent some time leveling the dishwasher with the leveling feet while I had it pulled out too. Easy repair.
Other Parts Used:
-
Philip from SAVANNAH, GA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One Door Spring on the Dishwasher Broke
The installation of the door springs was easier than I thought it would be. The Springs themselves included an extra metal tab, which made it so they could slip into the dishwasher body, without the need for additional plastic pieces, like the original springs. This was ideal because the way in which the spring plastic end broke would have made replacement very difficult. That said, the video instructions for our model dishwasher were inaccurate. There was no way to disconnect the power and water, as indicated in the video. This did make me think twice before pulling the dishwasher out. Luckily the electrical and water connections were long enough such that we could slide the dishwasher out to repair the springs. Also, fortunately, we didn't have to slide it out as far as was indicated in the video. Connecting the ropes was a little tricky, but by attaching the rope to the spring and pulling the rope with a pliers to extend the spring, this allowed me to hook the clip on the door. All in all, the process was easy. It just would have been better if the video actually reflected the work,
Other Parts Used:
-
John from NEEDHAM, MA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench set
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door would drop down fast when opening the door
Watched the short video on replacing the springs. each side only took a couple of minutes to replace once the dishwasher was pulled out from the cabinet. I was lucky and had ample slack in the electric, water supply, and drain line.
Other Parts Used:
-
JOHN from SUN CITY, AZ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher door dropping
After researching YouTube, I figured out the problem was the left side of the door was dropping. Took some screws out where the dishwasher was attached to the counter and cabinets. It took a bit to pull the dishwasher out but when done, the fix was easy. Reverse the process, make sure there’s power and hoses are back.
Other Parts Used:
-
Khanh from CHICAGO, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken door hingespring
Followed the instructions that came with the spring repair kit
Other Parts Used:
-
Brent from WESTON, WI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cheap plactic clips on end of rope broke on the door counter balance spring
as per youtube repair
Other Parts Used:
-
John from OOLOGAH, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
WAYNE
February 26, 2018
Door spring is broken. Is this the kit to replace the spring and rope for my model?
For model number SHX68T55UC/02
Hi Wayne,
Thank you for your question. Yes, this is the door spring kit that you will have to purchase to repair your dishwasher. I hope this helps. Thank you and have a great day!
22 people found this helpful.
Was this helpful?
Thank you for voting!
Nowell
April 18, 2018
My door spring broke off the plastic attachment on the base... this changed replacement part looks like it's redesigned to slide into an existing slot in the base... is that correct?
For model number SHX65T55UC
Hello Nowell, thank you for your question. The Door Spring Kit 00754866, is the correct replacement part for your specific model. They have made some changes to the part, so it might look different but will function the same, or better than the original! I hope this helps!
11 people found this helpful.
Was this helpful?
Thank you for voting!
Joy
September 27, 2017
I need to replace a Bosch dishwasher door spring and door rope. Will 00754866 work for my model dishwasher?
For model number SHE53T55UC/01
Hi Joy, Thank you for your question. Yes this is the kit you need. The kit comes with 2 springs and 2 ropes.Good luck with the repair!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Nathan
February 5, 2019
My door is slamming down if i left it gravity drop...i pulled the dishwasher out from under the counter and the spring assembly on both sides appear broken. from what i can see, (1) the plastic guides at the door end appear fine and the rope doesn't look broken but it's loose and not attached to the spring, (2) the springs have broken plastic pieces around them and i was able to easily remove the springs from the housing. i found this part (Bosch 00754866 dishwasher door spring kit genuine original equipment manufacturer (oem) on amazon and it includes two springs, but it doesn't look like it replaces any of the plastic that holds the spring in place...
For model number SHE68T56UC/01
Hello Nathan, Thank you for writing. After reviewing your model, I show that PS8770519 is the full door spring linkage kit. This does include the the white plastic pieces that hold the springs in place. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Neil
February 14, 2019
I need the door spring kit that has the plastic attachment and cord. The plastic part connected to the base cracked, will a replacement peice be provided and what should i order?
For model number Bosch SHX68T55UC/02
Hi Neil,
Thank you for your question. The door spring kit will come with the springs, the plastic attachments and the cords. The part number listed under your model number for the door spring kit is PS8770519. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Evan
April 2, 2018
Will this kit work on my Bosch dishwasher model shx68t52uc? The one that broke has plastic components on it, and i see these are metal. Thanks.
For model number SHX68T52UC
Hi Evan, Thank you for the question. Yes, this kit is listed under the model number provided as the correct kit. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
KELLY
May 6, 2019
Door slams open, looks like cable is broken. Is this the part to repair it? Do i need other parts too? Thanks
For model number SHX68T56UC/01
Hi Kelly,
Thank you for your question. Yes, this door spring kit is listed as fixing the issue the majority of the time. If this does not fix the issue, you will need to check the door latch. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
June 25, 2019
Will this part with model shx7pt55uc/01?
For model number shx7pt55uc/01
Hello Jim, thank you for your question. Unfortunately, that spring kit is not the right one. The spring kit for your unit is PartSelect Number PS10061222. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
John
June 27, 2019
Is this kit suitable for my model dish washer
For model number SHP53TL5UC/01
Hello John, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS8770519. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lyle
April 23, 2019
Will this kit fit my model? The cheap original plastic part disintegrated and the replacement part recommended by reliable parts does not work.
For model number SHE65T52UC/02
Hi Lyle, thank you for your question. Yes, this is the part that you are looking for according to your manufacturer and the model number provided. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8770519
Manufacturer Part Number: 00754866
Manufacturer Part Number: 00754866
Brand
Model Number
Description