Troubleshooting
This part fixes the following symptoms:
Door latch failure
This part works with the following products:
Dishwasher.
This part works with the following products:
Bosch.
Part# 00478812 replaces these:
AP4300195, 478812
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Marlene S - January 18, 2024
Verified Purchase
Worked perfect
The part fit great and my dishwasher is back and in great working order
Elliot W - April 26, 2023
Verified Purchase
Easy peasy.
Standard first time change out issues. Sometimes you wish you had three arms. Remember to changeover control buttons. Too bad of panel is so fragile, it shouldn't fail as much as it does.
Kevin B - February 16, 2023
Verified Purchase
Ordering was simple, and installation easy. We like our Bosch dishwasher a lot!
There is a weakness in the design of this part. The plastic is not robust enough around the framing of the control buttons. This is the second one we had to buy over 6 years or so.
Kevin H - March 10, 2022
Verified Purchase
Easy Fix - Prompt Delivery
Part arrived as promised in good packaging. Only issue is the panel has a extra opening for a button that does not exist on my dishwasher which creates some confusion for selecting a cycle as the words on panel do not reflect the cycle being ran. Other than that fit was great and install straight forward. Works great
Brian M - May 9, 2019
Verified Purchase
Quick delivery and easy repair
Front panel cover was as expected. It was delivered quickly and the repair was quite easy, took approximately 15 min. Using clamps to hold the door while removing screws worked well.
Bruce V - May 6, 2019
Verified Purchase
Precise fit, easy installation
Plastic tabs on bottom of old part broke. The replacement part was exactly the same. Just screwed back in. Manufacturer should use stronger attachment points(steel) and this would never happen.
Jordan C - November 23, 2018
Verified Purchase
Easy Repair - went as planned
Part came very quick, all packaging was perfect and part arrived in excellent condition.
Daniel B - September 19, 2018
Verified Purchase
Perfect fit
15 minutes was done
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The door handle cracked near the control buttons - making the appliance use inconsistant
I used clamps to clamp the door together while I unscrewed the front panel from the back. Once the screws were out, I carefully released the clamps holding the two together with my other hand. Once the door was off, I release the control cover - it was a bit tricky b/c I didn't want to break any other pieces. Once that was off, I removed the control button covers from the old control cover and installed them on the new one. I then carefully removed the small silver door handle cover from the old one and installed it on the new one. This piece was a bit tricky b/c it could bend and break easily if wrenched too hard. Once that piece was on, I snapped the control cover onto the front door panel - which snapped on very easily. I then re-clamped the front panel to the metal door carefully aligning the screw holes and inserted all the screws. Once they were lightly tightened, I released the clamps and tried the buttons. All worked well and the control panel was fixed.
Other Parts Used:
-
Lon from LAWRENCE, KS
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
20 of 23 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top Fascia panel brackets cracked
Remove lower front panel 6 screws, remove screws from top fascia panel , prey front edge of top panel taking clips out of mounting holes in door, panel will slide then push 2 lower clips on panel to pop panel off. When re-installing cycle buttons numbers are lettered have to go back same location or buttons will not let panel to fit correctly, when panel is snapped in install 2 screws in bracket clips and reinstall front panel. Shut off power before starting.
Other Parts Used:
-
Donald from SCRANTON, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The facia panel broke and needed to be replaced.
There are three screws on the left and right side each that secure the lower outside cover to the inner panel. They need to be removed to provide access to the two screws that hold the facia panel to the inside panel. Remove the three screws on each side. The lower panel is now separated from the inner panel. Then remove the two screws that secure the facia panel (the one you are replacing) and lift the facia out. The new facia panel does not come with buttons. So transfer the buttons from the old to the new panel, click it in place - needs a little TLC to align the tabs at the top and the screw holes with those in the inner panel. Make sure all buttons can be operated before tightening the screws that hold the facia panel onto the inner panel. Then align the lower panel's screw holes (3 on each side) with the holes in the inner panel (you might need someone to help you hold the two panels in alignment while you secure the location with at least one screw each on the left and right sides). Then put the remaining screws and tighten them. You are done replacing the facia panel.
Other Parts Used:
-
Nitin from MASON, OH
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
October 3, 2019
The control panel facia snapped off where the plastic is screwed onto dishwasher. When i open the door the panel comes off. How do i order a new one. Thanks
For model number SHE43P06UC/64
Hello Ron, thank you for inquiring. The correct replacement for your model is part number PS8734594. To place an order, please feel free to contact customer service by phone or you may do so online. Thank you!
4 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS8717588
Manufacturer Part Number: 00478812
Manufacturer Part Number: 00478812
Brand
Model Number
Description