Part Location Diagram of WR17X11440 GE Water Tank Assembly
See part 810 in the diagram
Replacing your General Electric Refrigerator Water Tank Assembly
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Water Tank Assembly

★★★★★
★★★★★
26 Reviews
$58.31
  Special Order
PartSelect Number PS783769
Manufacturer Part Number WR17X11440
Manufactured by GE
Product Description

Water Tank Assembly Specifications

This tank stores water until the water actuator is activated and water is requested.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your General Electric Refrigerator Water Tank Assembly

Replacing your General Electric Refrigerator Water Tank Assembly
Troubleshooting
This part fixes the following symptoms:
Leaking | Not dispensing water | Leaks water
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint.
Part# WR17X11440 replaces these:
AP3205548, 1091942
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
26 Reviews
4.8
Filter By Rating:
  • 5 Stars
    22
  • 4 Stars
    3
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 21 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Water tank cracked
So there's a plastic water tank in our fridge, its purpose is to chill water so it's nice and cold when you dispense it from the freezer door tap. Long story short, during out kitchen remodel I stored the fridge in our unheated Wisconsin garage. The leftover water in the tank froze, expanded and ruptured it. Got the replacement, super easy to fix. The tubing connections are shark bite, just press them together and they're water tight. Pretty simple plug and play operation but you do have to pull the fridge all the way from the wall and shut off the water supply.
I replaced the filter too, just incase the freezing water messed with it in some undetectable way.
Other Parts Used:
Ice and Water Filter
  • Nate from MILWAUKEE, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
189 of 211 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Small leak on water tank behind vegetable crisper
1. Turn-off water
2. Removed drawers and bottom three shelfs
3. Remove screw inside refrige that is holding the water tank in place
4. Remove bottom front grate on fridge (2 screws) and disconnect water line from quick disconnect (residual water will run out of line)
5. Remove bottom cover on back of fridge
6. Disconnect water line from quick disconnect on bottom left side when looking from the back of the fridge (residual water will run out of line)
7. Remove water tank from inside of fridge
8. Install new water tank - install screw that hold water tank in position
9. Route lines through hole and to the two locations you removed the old ones
10. Install both lines by pushing them all the way in the quick disconnects. Pull on them to make sure they are secure.
11. Turn on water and look for leaks
12. Reinstall bottom front grate (2 screws)
13. Reinstall back cover (5 or 6 screws)
14. Install shelfs and drawers inside fridge
Other Parts Used:
  • Matt from RPV, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
115 of 130 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cold water reservoir tank was cracked and spraying the interior of the fridge
Symptom was water running out of bottom of fridge. Found water pooled up under bottom drawer. Removed (3) drawers and found water was "spraying" from the reservoir tank at back of fridge. Unboxed the new "tank" and confirmed it was the right one by holding it up to the one still in the fridge. Pulled fridge from the wall; removed the rear bottom cover panel on the back using the nutdriver. Removed the solenoid assy by taking that single hex screw out. Push down on the blue circular flange where tube supply enters solenoid, and release the tubing from the solenoid. Remove front bottom cover with phillips screwdriver. Located 2nd tubing connector below freezer (under the unit) and used the same procedure to release that tube from the coupling. Removed screws from tank on inside of fridge, after removing several shelves that were in front of it. Pulled the tubing from the old unit up and out. Discard. Got new unit and fed tubes through the hole the others came out of (back right corner of fridge) MAKE SURE THE NEW TUBES HAVE THEIR "stoppers" IN PLACE. You don't want to contaminate the new tubes with insulation or other debris. Make sure the "o" ring that seals the tubes on the inside of the fridge (supplied with new unit)and the styrofoam insulation stays in place to keep air from leaking through the holes the tubes go through. Installation of the (2) tubes is simple, simply push them into the connector on the solenoid, and the coupler under the freezer. You'll need to feed the longer tube from the back to the front left corner where this coupler is. After making the connection, I bolted the solenoid unit back to the fridge (only 1 screw) and then tested the unit to see there were no leaks before I buttoned everything up. NO LEAKS!! Put the front bottom grill back on with the (2) phillips screws, and the back bottom cover back on with the hex screws removed near the beginning. Probably took longer to write this than it did to make the repair.
Other Parts Used:
  • Thomas from Waynesboro, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
41 of 49 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cracked water tank from freezing
Followed your instructions and you made it simple.Thanks a million.
Other Parts Used:
  • Steve from Easton, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
14 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Leak in vegetable Drawers
shut off water supply to unit, pull the unit out,unplug, unscrew lower back cover, locate valve relay unit (bottom left, black and clear hose coming out of it) undo the quick connect for the clear water hose on the right (black one is for ice).

front of the unit, bottom left, locate the other hose (longer one) running to the freezer door from under the unit, undo quick connect.

Inside unit, remove middle drawers, careful with the glass panels as these just lay on top and are not fixed.

undo the 3 screws for the old tank, pull it out, snake the hoses thru the grommet on the bottom, reverse process...all set!
Other Parts Used:
  • John from Miami, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
13 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water collecting under vegetable tray
Very easy to install. Simply follow the hoses to the end. One ends under the freezer door in front. The other requires you to take the back panel off the fridge - then its right there. There is a blue valve where it connects. Pull back on the white ring at the top of the blue valve and the old tube will release. Then you can just pull the old water tank out and thread the new tubes through. Connect the same way and you disconnected.
Other Parts Used:
  • Kimberly from Suwanee, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
13 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water was squirting out a crack in water tank assembly.
This was a great opportunity to clean the bottom 3 shelves. I unplugged the frig.,disconnected both water lines, unscrewed water tank, pulled water lines out, put new tank in and pushed new water lines in and connected them, and plugged frig. back in. I grabbed my glass to get a drink and feeling proud but no water. I thought about this for a while and came to the conclusion that the freezer was set to 9 and the water had frozen in the value in the door. I dropped the temp. in the freezer from 9 to 3 and after about 2 days the water worked just fine. I emptied the ice because it was clumped into one big piece. I heard the ice maker going to town all day long. I called for ice later and the motor that dispenses the ice was humming and no ice was dropping. I thought about it and could not come up with the answer so I called tech. at GE and he was no help. So I solved one problem and now I have another that I don't have an answer to. My last attempt is to remove the motor housing to see if gears are jammed or something else.
Other Parts Used:
  • Fillmore from Asheville, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
6 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Busted water tank
Removed the lower 2 drawers, lower front grill, rear lower compressor cover. Removed the 2 water lines from the quick connects and screws from the water tank. Pulled lines through the hole in the right rear of the refrigerator and removed tank. Then reversed steps to install new tank. The upper plastic tank cover has 2 buttons on top that are really screws with a plastic cap, these are easily removed with pliers.
Other Parts Used:
  • Larry from Shepherdsville, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drinking water cooler leaked at the seam.
ordered replacement part with the understanding that tubing to the water valve could be easily removed. The tubes were carefully removed with some difficulty, and when the new tubes were inserted one leaked. The tube seat was not snug. Therefore a new water valve was purchased. The installation was successful within about 20 minutes. If I were to do the job again, both the water resevoir and valve would be ordered together.
Other Parts Used:
  • Alric H from Waynesville, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The water dispenser was not working, then the tank was leaking
The water dispenser was not working, but when I pressed the lever I could hear it attempt to disperse water. But when looking inside I could see that when I pressed the lever it was spewing water from the tank. I was not certain why it was not dispersing water, but I knew I had to replace the leaking tank. I found several YouTube videos that described in detail how to replace the tank (and I highly recommend doing that). The removal and replacement was very straight-forward and that part took only about 30 minutes. But the time-consuming part was cleaning behind the refrigerator and cleaning the inside as well (since I already had most of the shelves out). Then once I got it all back together I tested the water dispenser and still nothing. So I disconnected the line coming out of the tank going up into the door and then tried again. This time water was coming out of the line. So at that point I was fairly confident that the problem was a frozen line somewhere in the door. After leaving it unplugged for a while and also heating the door with a hair dryer, I connected the line again and got water dispensed.
Other Parts Used:
  • Steve from AUBURN, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

19 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vernon
August 11, 2017
Water tank keeps freezing. Prevention???????
For model number PSC23MGMAWW
PartSelect logo
Hi Vernon, Thank you for your inquiry. For certain refrigerators, the drawers inside refrigerator have their own temperature settings. Food inside the refrigerator will absorb the cold air. If the bins are set to the highest cold setting and they have no food or very little food inside them then the water tank will freeze. You should only use the highest cold setting if the bins are full. In general as well, if there is very little food in the refrigerator cold air will sink and stay at the bottom of the refrigerator and this will cause the water tank to freeze. I hope this helps. Thank you and have a great day!

16 people found this helpful.

Was this helpful?
Thank you for voting!
Joe
December 10, 2018
I installed the water tank assembly, would never have tried without the video, great job. How long does it take for the frig to distribute water after installing? Also i have a slight drip from the control unit in the back where to water lines connect. I don’t see this part, can you provide replacement? Thanks again, videos are just great!!
For model number GE ZFSB23DNDSS
PartSelect logo
Hello Joe, thank you for your question, and feedback about completing the tank repair! The water should be distributed within a few minutes. Allow for a bit of time for the water to get back through the system. The part the water lines connect to at the back of the fridge is called the water valve. If there is a little water leaking from there it should be replaced. That part number is PartSelect Number: PS304374 and we have an installation video on that part as well! Good luck!

7 people found this helpful.

Was this helpful?
Thank you for voting!
Mike
October 30, 2017
Hi! I have an odd problem. I can't get water out of the dispenser in the door but the ice maker makes ice. I disconnected the tubing from the water solenoid and water flows fine through the solenoid. As far as I can tell, the tank and tubing are the only things between the solenoid and the water dispenser.Is it possible that they are blocked?If so, should I just replace the whole tank assembly? Thanks
For model number GSS25WGTACC
PartSelect logo
Hi Mike, Thank you for the question. In most cases if the dispenser is not dispensing it is the Micro Switch. The switch can be tested for continuity with a Multi Meter. It is also good to have the filter replaced ever 6 months. Only way to know if the water tubes are blocked is to remove them and run water through them. Hope this helps!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Bill
May 3, 2019
The water dispenser tank on my GE refrigerator (model tfx20jrbbwh) has a crack and is leaking. The water dispenser tank for this model (part # wr17x3105) is apparently not available. Can i just eliminate the tank by running tubing from the inlet water valve to the water dispenser supply line or use a coupler to connect the in to out tubing to bypass the tank? If this would work, what size and kind of tubing do i need? Thanks for your help.
For model number GE TFX20JRBBWH
PartSelect logo
Hello Bill, thank you for your question. Yes, you can eliminate that tank by adding tubing and couplers. the water tubing connected to the water tank WR17X3105 is a 5/16" waterline. I hope this helps!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Connie
October 23, 2019
Longer hose from tank is leaking. Depending on where its leaking can it be bypassed w/blue connector? So I'd be cutting out cracked piece and putting ends in connector. Do you have part number for blue connector? Also do you charge for shipping?
For model number PSS26MGPACC
PartSelect logo
Hello Connie, Thank you for the question. Very sorry but I am not showing a Blue Connector but, If the line is cut straight, you should be able to use a Union, PartSelect Number PS758446. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Rene
May 16, 2019
My fridge is 10 years old,and stop getting water and ice, any idea what it might be.
For model number GSHL5KGXCCLS
PartSelect logo
Hello Rene, Thank you for the question. This sounds like an issue with the Dual Inlet Water Valve, PartSelect Number PS304374. if the ice maker and dispenser are not getting water, the valve may be defective. Thank you for your inquiry, good luck with this repair!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Charles Mcneely
August 15, 2017
What is the part number and can you sell me theplastic cover and foam that covers the water tank?
For model number gshl5kgxbcls
PartSelect logo
Hi Charles, Thank you for your inquiry. We do provide the insulation tank foam. The part number for it is PS964273. If you have any questions, please do not hesitate to ask. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Glen
December 2, 2017
The water has a plastic smell and taste. Refrigerator is 15 years old and the water just now taste awful. The ice is just fine. Any ideas what might be wrong. I don’t use a filter since the water is filtered thru a reverse osmosis unit. Filters in the reverse osmosis unit have been checked and verified in good working order.
For model number Pss26mgpabb
PartSelect logo
Hi Glen, Thank you for the question. I suggest checking and flushing the waterlines. They can have a build up over time and if they have never been replaced or flushed in 15 years this maybe the issue. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Chuck
February 25, 2022
I am getting dripping water on the floor when we switch from cubes to water. there normally is a "click" sound when the change from ice to water is complete. If the "click" occurs within a couple seconds I have no leak. If the "click" is not heard, or occurs many seconds later, I still get water but then there is water dripping on the floor. Usually changing back to ice stops the dripping. I removed the kick-plate and can see water coming down the 1/4" water line and dripping onto the floor.
For model number GSS25GSHPCSS
PartSelect logo
Hello Chuck, thank you for writing. The Water tank Assembly part PS783769 is the first recommendation. Secondly, it could be a faulty Micro Switch PS8259956. We have a video for you to access. We hope to hear from you soon.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Yana
May 31, 2019
After installing water tank assembly, the tank only fills halfway because the pressure keeps building up.Kept priming it no avail. it doesn't make no sense?
PartSelect logo
Hello Yana, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS783769
Manufacturer Part Number: WR17X11440
Brand
Model Number
Description
General Electric
39639USXAGV
Refrigerator
General Electric
CSHS5UGXBSS
Refrigerator
General Electric
CSHS5UGXCSS
Refrigerator
General Electric
CSHS6UGZBSS
Refrigerator
General Electric
CSHS6UGZESS
Refrigerator
General Electric
CSHS6UGZFSS
Hotpoint
CSS25USWASS
Refrigerator - W Series
Hotpoint
CSS25USWCSS
Refrigerator - W Series
General Electric
CSS25USWS
Refrigerator - GE Refrigerator Model CSS25USWS Parts
General Electric
CSW25LSWASS
Refrigerator - REFRIGERATOR W SERIES
General Electric
CZS22MP2NBS1
Refrigerator
General Electric
CZS22MP2NDS1
Refrigerator - Side-By-Side Refrirator
General Electric
CZS22MP2NES1
Refrigerator - Side-By-Side Refrirator
General Electric
CZS22MP2NHS1
Refrigerator - Ge Refrigerator Czs22mp2nhs1
General Electric
CZS22MSKBHSS
Refrigerator - REFRIGERATOR
General Electric
CZS22MSKEHSS
Refrigerator - REFRIGERATOR
General Electric
CZS22MSKKHSS
Refrigerator
General Electric
DSD26DGWABG
Refrigerator - W Series
General Electric
DSD26DGWB
Refrigerator - GE Refrigerator Model DSD26DGWB Parts
General Electric
DSD26DGWCBG
Refrigerator - W Series
General Electric
DSD26DHWABG
Refrigerator - W Series
General Electric
DSD26DHWB
Refrigerator - GE Refrigerator Model DSD26DHWB Parts
General Electric
DSD26DHWCBG
Refrigerator - W Series
General Electric
DSE25JBLJCTS
Refrigerator
General Electric
DSE25JBLKCTS
Refrigerator
General Electric
DSE25JEMGCDS
Refrigerator
General Electric
DSE25JEMKCDS
Refrigerator
General Electric
DSE25JGHBCBB
Refrigerator - REFRIGERATOR
General Electric
DSE25JGHBCWW
Refrigerator - REFRIGERATOR
General Electric
DSE25JGHECBB
Refrigerator - REFRIGERATOR
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service