Ice Funnel - White
Fits your BSS25JFTHWW!
$57.61
Special Order
Fits your BSS25JFTHWW!
PartSelect Number
PS758841
Manufacturer Part Number
WR17X11264
Manufactured by
GE
Product Description
Ice Funnel - White Specifications
This part is the replacement ice funnel for your refrigerator. It is made of white plastic and is sold individually. The funnel is approximately 7 inches wide and 8 inches long. The ice funnel has a paddle that, when pushed by your glass, activates the dispenser and releases ice or water through the funnel. If your refrigerator is not dispensing water or ice, you may have a damaged ice funnel. This is an authentic OEM part sourced directly from the manufacturer.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not dispensing water
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint.
Part# WR17X11264 replaces these:
AP3185990, 947249, WR17X10711, WR17X11150, WR17X11275
Customer Repair Stories
Average Repair Rating: 3.1 / 5.0, 6 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Ice & water dispenser wouldn't shut off
Took the trim piece off, took 4 screws out & replaced the part. Problem solved!
Other Parts Used:
-
eve from carrollton, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
23 of 38 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Dispencer Wtr/Ice Ran Continuously.
First I removed the front cover (pried a screwdriver gently under the bottom plastic seal between housing shield and front cover, it came off nice and easy without damage). Removed electrical plugs from electronic board (front cover) so that it did not hang from the wires and get it the way. Then removed four screws holding housing shield on. Removed housing shield, first observing with new parts next to me how it came apart. And then disassembled funnel from shield. Simple but being careful is the key to putting the new unit together as with any plastic parts it's easy to snap if forced. Replaced all parts in reverse order removed. This is a good time to clean all parts for any mold build up that could not be reached otherwise. Parts select personnel were courteous and very helpful. Especially when I almost ordered the wrong color parts. Ask questions if not sure.
Other Parts Used:
-
DALE from JACKSONVILLE, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
20 of 27 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice cubes fell on floor
Removed front cosmetic panel on freezer door. Removed display. Removed display by pressing down and then out. Removed 4 screws holding display panel and then removed. Removed dispensing Funnel. Installed new dispensing funnel onto new funnel extension. Installed aforementioned using reverse procedure of dispensing funnel removable. Rre-enstalled display panel and display. Replace cosmetic panel on freezer door. Works fine.
Other Parts Used:
-
Roy from Tucson, AZ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
8 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
This Model is a LEMON (on-line for compliants). Numerous Problems
Removed 4 screws & replace parts.
Other Parts Used:
-
OLESTER from SAN DIEGO, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers
7 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water and ice never flowed from door
Replaced parts by removing four screws.
Old parts were damaged from overheating with a hair dryer because the water line was frozen.
Old parts were damaged from overheating with a hair dryer because the water line was frozen.
Other Parts Used:
-
DON from PETERSBURG, VA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
plastic got hot and distorted grandchild turned light don and itgot the parts very hot .
simply removed the parts, and replaced the new parts and disconnected the light switch so it only comes on when using the dispenser and goes off by it's self.
Other Parts Used:
-
harold from gramercy, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wendy
January 27, 2022
my Hotpoint side by side refrigerator has a broken ice/water dispenser. mine doesn’t look like the ones I am finding in your website. is a replacement part available? this is the type where pushing back on the chute triggers the dispenser. the part the dispenser arm goes into has broken.
For model number HSS25ATHWW
Hello Wendy, thank you for your inquiry. The issue you are asking about has a combination of items and not an assembly. Funnel Ice Dispenser PartSelect Number PS1483300, Refrigerator Ice Dispenser Lever PartSelect Number PS1483305, Dispenser Door Recess Crank PartSelect Number PS291908. You may also call in to speak with an agent at 888-260-4310. We hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Deb
February 19, 2018
The ice funnel is sitting crooked and can only push from way up top of it with the glass to dispense water or ice. How do i fix it?
For model number GSH25TFXB
Hi Deb, Thank you for the question. Only way to have it fixed would be to replace the funnel. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS758841
Manufacturer Part Number: WR17X11264
Manufacturer Part Number: WR17X11264
Brand
Model Number
Description