![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Interface Board
Fits your GFWN1100D1WW!
$727.35
Special Order
Fits your GFWN1100D1WW!
PartSelect Number
PS6011703
Manufacturer Part Number
WH12X10544
Manufactured by
GE
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH12X10544 replaces these:
AP5657442
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Allen
October 21, 2021
I ordered the interface control but I did not get the instructions to program this machine model #GFWN1100DOWW can you send the instructions to my email please thanks
For model number GFWN1100D0WW
Hello Allen, Thank you for the question. Here are the instructions as per GE. "Program the replacement control board: Step 1- Reconnect power to the washer. (The display will now show “---”, which
means no model has been selected.) Step 2- Rotate the cycle knob until the correct model number is displayed for the specific model number. (1, 2 or 3). Your Model you need to Select 1. Step 3- Once the correct model is showing on the 7-segment display, press and hold the Start/Pause button for three seconds (or until a second beep is sounded). Step 4- Press the Power button to reset the control.
NOTE: If an error is made when programming the control, enter service mode and select t01. then repeat
steps 2 through 4". We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lorraine
February 27, 2018
Is the interface board the part of the computer that sends the message to let water come into the machine
For model number Gfwh1200d0ww
Hi Lorraine,
Thank you for your question. Yes, the interface board is the part that sends a message to the water inlet valve to let water come into the washing machine. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Cody
February 28, 2019
Does the ui board need to be programed to the machine once installed
For model number GFWN1100D0WW
Hello Cody, Thank you for the question. The board will need to be programed. The part should come with instructions based on your model. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS6011703
Manufacturer Part Number: WH12X10544
Manufacturer Part Number: WH12X10544
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)