Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kostiantyn B - February 26, 2024
Verified Purchase
Great part
Great part. Perfect pictures on web site. Easy to identify. Fast delivery. Easy and fast repair.
★★★★★
★★★★★
Jon S - May 17, 2020
Verified Purchase
The right part at the right time
Arrived in fast order and fit the repair. Great experience
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water leak
Unscrewed mounting bracket from Fram. Unplugged wires. Took adjustable wrench took water line connector off original valve. Place connector on new valve and reconnected all lines and mounted back on frame.
Other Parts Used:
Brad from MILLHEIM, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Wrench (Adjustable)
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Delois
October 27, 2021
Water isn't coming into the dishwasher
For model number GDF520PGD0BB
Hi Deloris,
Thank you for your question. If your dishwasher is not filling with water, there are some other parts that you will need to check to see which one is causing the issue. You will need to check the water inlet valve, the flood switch and the door latch. You will find the information on how to test these parts under Free Repair Help and Instant Repairman on our website. We hope this helps! Good luck with the repair!
GE dishwasher, model #gdf520pgd0bb seems to be hanging between cycles.You can hear it filling with water when you turn it on. however when the water stops flowing nothing happens for quite a long time (10+ minutes) before the wash/spray cycle starts which only runs for a short time before it stops and rests for what seems to be way to long before it washes/sprays again for a short time. dishes are not getting clean and there are blobs of soap on the floor inside the dishwasher by the bottom of the door.
replaced the flood switch, thinking the water level was inadequate or it was not sending the proper signal to start the next cycle, but that has not solved the problem. i did not replace the water inlet valve as i can hear water flowing into the dishwasher and it sounds like it's spraying around and the the surfaces inside of the dishwasher all seem wet after it finally gets around to spraying/washing? it is also plenty hot as it fogs my classes when i open the door between cycles.
i noticed that when i turn the dishwasher off mid cycle or after the spray/wash cycle the drain pump runs for a very long time after it has run out of water to drain. at best it sounds like its actually pumping water about 1/4 of the time it's running?
there is plenty of water reaching the inlet side of the water valve.
i'm stumped. appreciate your help.
thank you,
gary
For model number GDF520PGD0BB
Hi Gary, thank you for your question. It looks like there are a few parts that you should check when your appliance is not starting properly. First you may want to check your door switch and second you may want to actually take a look at the flood switch of your appliance as well. You could also check your turbidity sensor. If those parts are fine then you may need to look into your heating element being the issue. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Bruce
February 25, 2018
On the yellow housing where the hot water comes into the unit ( i believe #744) i need the 4 screws to connect the unit together. Or i need to know the size... any ideas?
For model number GDT550HSD1SS
Hi Bruce,
Thank you for your question. The part number listed under your model number for the screw should be PS8756144. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Chris
March 28, 2018
Hi, on our GE dishwasher when in cycle i cannot get water to go thru the diverter to feed the top and middle washer arms . I am suspecting the water inlet valve is defective. With the power off i check the continuity with a meter and am not getting a high reading . Any thoughts on this or if it could be something else , there are no clogs in the diverter or the conduit going to the sprayer arms ...there is very good pressure and water flow to the front of the diverter assembly but nothing to the rear that leads to the middle and top sprayer arms.
For model number GDT530PGD0BB
Hi Chris,
Thank you for your question. It could be the valve but it might also be your pump that is the issue. I would suggest checking your pump as well. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This is a flood switch assembly for your washer. The flood switch controls the hot and cold water filling your washer tub to ensure the proper amount of water. You may need to replace this part if your washer is overfill...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS6011659
Manufacturer Part Number: WD15X10015