Pump Check Ball
Fits your FGBD2445NQ7A!
$64.40
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your FGBD2445NQ7A!
PartSelect Number
PS420460
Manufacturer Part Number
154246402
Manufactured by
Frigidaire
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Gibson.
Part# 154246402 replaces these:
AP2109095, 419200, 154246401
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Simon
March 3, 2018
The water does not drain when it finishes. Can you help?
For model number FFBD2406NS0A
Hello Simon,
Thanks for your question. This is typically due to the drain pump. You may want to test it with a multimeter for electrical continuity, and replace it if it shows no continuity. Also test the water inlet valve and examine the drain hose for any signs of wear and tear or clogging.
I hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Dede
March 21, 2018
My dishwasher fills and then sounds like it is running but no water is being sprayed from any of the spray arms. It otherwise drains fine after its "cycle" and continues on filling again and sounding like it is running but no water spraying. What would probably be wrong with it? Thank you, dede.
For model number FDB1050REC0
Hi Dede,
Thank you for your question. If there is no water spraying from the spray arm, the pump may not be working correctly. You will need to check the wash impeller, which looks like a fan blade, that forces water through the spray arm and you will need to check the drain impeller which pushes the water to the drain port. If any of these are not working correctly in the pump, you will need to replace it. I hope this helps. Thank you and have a great day!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Jerry Dietz
February 12, 2018
What is the purpose of the check ball ?
For model number FFBD2406NB7B
Hello Jerry, thank you for your question. The check ball 154246402 prevents water from flowing the wrong direction through the pump and hoses. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
MARVIN
November 13, 2018
Is the check ball supposed to float in the water?
For model number PLD4375RFC3
Hello Marvin, Thank you for the question. The ball will float within the valve and sump, but not within the tub of the appliance. Thank you for your inquiry, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Richard
September 20, 2019
Does ps420460 pump check ball (Frigidaire # 154246402) float? The one currently in my dishwasher does not float and does not rise up the rail and allow water to be pumped to the top sprayer. If the replacement floats then that would explain the problem, mine has lost its buoyancy. Any insight would be helpful. Thanks.
For model number FDB636FS5
Hello Richard, Thank you for the question. Yes, the ball should float. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Don
February 20, 2022
Dishwasher works but drain water from the sink back flows into the dishwasher does the check ball prevent that
For model number FDB710LCS0
Hello Don, Thank you for the question. The check ball is a small plastic ball in the check valve which prevents water from returning to the dishwasher after it has drained. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
V
July 21, 2021
Upper rack is not cleaned well. Replaced main circulation pump, replaced upper rack arm and wall gasket. All nozzles and filters are clear. Water height sensor clicks consistently at about 0.5in. Water pressure is good. Everything sounds good. Hear the ball moving into different positions through the wash program. Can't figure it out. Lower rack is clean. What should i test or replace next? Spent over $200 already.
For model number FFBD2408NS0A
Hello,
Thank you for your question. If you are overloading both the upper and lower racks, this may prevent the dishes on the upper rack from becoming clean. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
TREIMANE
June 13, 2023
DISHWASHER FILLS UP WITH WATER WITHOUT IT BEING ON AND SPILL OUT AT THE BOTTOM OF THE DOOR.
For model number FDB4315LFCO
Hi Treimane, thank you for contacting us. It appears that your dishwasher may have a damaged water inlet valve, part number PS1524958, that is allowing water to go in when it is turned off. Also, for the leakage from the bottom, we recommend replacing the bottom door gasket, part number PS9495545. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS420460
Manufacturer Part Number: 154246402
Manufacturer Part Number: 154246402
Brand
Model Number
Description