![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Product Description
Timer Knob Assembly Specifications
This timer knob assembly is a manufacturer-approved replacement part for your washing machine. This is an easy repair which requires no tools. Simply unscrew the existing knob, which may take some force or wiggling, and screw in the new one.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Washer.
This part works with the following products:
Frigidaire, Gibson.
Part# 131446202 replaces these:
AP2106894, 407411, 131446202
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Rein T - March 9, 2021
Verified Purchase
Almost perfect
The new part arrived almost as fast as it took me to replace the broken timer knob. No problems there. However after one load of laundry my washer broke down, most likely because of a malfunction of the water pump. I have decided to get a new washing machine and if anyone needs a one-time used timer knob assembly for a good price, let me know.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 13 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Drum noise when spinning,timer knob broke
First of all the timer knob was very easy. My wife changed it in about two minutes. Simply spin the old off and the new on. Replacing the shell with the tub bearing is much more involved. Remove the rear cover, lower front panel and top. Remove belt from motor and then the motor itself. I used my cordless drill with a socket adapter and extensions to reach the screws. Disconnect the wiring and take the motor out of the machine. Disconnect the bellow type hose on bottom and small hose from the soap dispenser on top front shell. Support the drum on two 2 by 4's or 6's. Remove the top pins of the shock absorbers and lean back out of the way. The tub is now hanging on the top springs and is still held in place with the front boot. The boot needs to be seperated fron the washer with a single blade razor. This was the second time I did this repair so my boot came loose easily. With one person lifting the front and one in the rear lift the shell unit to remove the top springs. The bracket that keep the springs in place need to be removed prior to this.
Slide the tub unit out the back of washer. I placed it front down by supporting it on 2 by 4's. Remove the large rear pulley. This was tough as moisture had rusted it together. Apply pressure evenly around the pulley with small bars as you tap the slightly loosen bolt that hold the pulley on. This should work the pulley free. Using my cordless drill I removed all the bolts holding the rear and front tubs together and reassembled following the reverse of this procedure. One problem I now have is that the shaft of the stainless steel tub is worn and I still have noise. Again, this is my second replacement of this bearing each about 4 years apart. I will not do the repair again as price of tub and rear shell are to expensive. I was very satisfied after my first repair and encourage you to try before purchasing new.
Slide the tub unit out the back of washer. I placed it front down by supporting it on 2 by 4's. Remove the large rear pulley. This was tough as moisture had rusted it together. Apply pressure evenly around the pulley with small bars as you tap the slightly loosen bolt that hold the pulley on. This should work the pulley free. Using my cordless drill I removed all the bolts holding the rear and front tubs together and reassembled following the reverse of this procedure. One problem I now have is that the shaft of the stainless steel tub is worn and I still have noise. Again, this is my second replacement of this bearing each about 4 years apart. I will not do the repair again as price of tub and rear shell are to expensive. I was very satisfied after my first repair and encourage you to try before purchasing new.
Other Parts Used:
-
Kevin from Gilman, IA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
46 of 57 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob broke off
I had to "spin" the leftover part of the knob with a pair of pliers.
I then spun the new knob on and that was it!
I was a hero with my wife and it didn't take but a couple of minutes.
I then spun the new knob on and that was it!
I was a hero with my wife and it didn't take but a couple of minutes.
Other Parts Used:
-
Charles from Haltom City, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
24 of 30 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob deteriorated, engineering flaw
I used the temporary knob (Vise Grip) and applied slight pressure in the counterclockwise direction and the knob turned right off and then through the old one in the garbage can and removed the new one from the plastic bag and lined up the threaded shaft to the threaded hole in the new knob and applied slight clockwise turning action careful to not cross thread the mating threads and proceded to tighten to full seating of the knob and further proceded to test the operation, proceded to wash a load of dirty laundary, works perfect.
Other Parts Used:
-
Bob from Lake Park, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
19 of 22 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The knob to turn washer on by pulling broke
The website saved us a huge amount of time. We thought we were going to have to take the stacking washer/dryer apart to access the panel. While searching for the part some nice person had already listed the procedure to change. Gently attach plyers to remaining knob and turn counter clock wise to remove. By knowing how this was removed it also allowed us to turn the washer on and off for laundry while waiting for the part. Just gently grab the edge of the remaining know and pull out to start. The broken knob can also be use to turn to cycle. The part was ordered on Saturday late in the day and arrived first thing Tuesday. Great service.
Other Parts Used:
-
Linda from Richmond, RI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
16 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Timer Knob
Knob treasds onto machine shaft. Grab remaining part of broken assy with pliers and spin loose (left). Spin new assy on to the machine. Very easy repair. Quick service from Partselect.com
Other Parts Used:
-
David from San Pedro, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
11 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knob was broken from use
Very easy to replace the assembly. Just twist counterclockwise to unscrew and replace with new assembly. You can probably complete without any tools, but the pliers will give you some leverage if needed.
Other Parts Used:
-
Brian from Woodridge, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
10 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken timer knob
received new part from Partselect within 48 hours! Very simple replacement by unscrewing remainder of old knob counterclockwise. The screwed in new knob in clockwise direction. That was all.
Other Parts Used:
-
Jens from PALO ALTO, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
5 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer knob broke
The repair was easy, easy, easy. The part arrived within 2 days after I ordered it. I used pliers to remove the broken knob and replaced it with the new knob. It takes about 30 seconds to fix.
Other Parts Used:
-
Lisa from gorham, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer Knob broke & couldn't be advanced
Removed the outer broken section, then used pliers to spin off the inner assembly. Spun on the new knob assembly and the 18-yr.old washer is again functional. ("Lefty-Loosy; Righty-Tighty") Took less than 2 minutes. Ordering online was easy, and the part arrived in a timely manner.
Other Parts Used:
-
Paula from NEW BERLIN, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer knob broke
It took longer to find a pliers in the garage then to replace the timer knob
with pliers removed broken timer knob then put screwed new one on done less than 2 minutes
with pliers removed broken timer knob then put screwed new one on done less than 2 minutes
Other Parts Used:
-
todd from superior, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS417831
Manufacturer Part Number: 131446202
Manufacturer Part Number: 131446202
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)