Vent Grille - Biscuit
$62.04
Special Order
PartSelect Number
PS391932
Manufacturer Part Number
8183852
Manufactured by
Whirlpool
Product Description
Vent Grille - Biscuit Specifications
This vent grille mounts on the top of the microwave above the door.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave.
This part works with the following products:
Whirlpool, Estate, Kenmore.
Part# 8183852 replaces these:
AP3119800, 903826, 8169643, 8183852
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 10 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
screw tabs were broken
removed the two screws, removed all of the broken tab pieces, replaced with new grill, put the two screws back.,....DONE Easy as pie
After reading other entries, I have determined this is a problem with most grills on the whirlpool microwaves. Defective material ..becomes brittle and crumbles.
After reading other entries, I have determined this is a problem with most grills on the whirlpool microwaves. Defective material ..becomes brittle and crumbles.
Other Parts Used:
-
Kathleen from San Jose, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to replace the grill vent.
Removed 2 screws from top of microwave. Place new grill in place. Replaced 2 screws that were removed. What was wonderful is I ordered the part around 3 pm on a Friday. The part arrived at 9AM the next day and that was without requesting special shipment.
Other Parts Used:
-
Juanita from Orlando, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Microwave grill vent broken plastic tabs, range switch defective
Removed old grill from microwave and replace with new part. Range removed old switch and
replaced with new part. No problems. I was pleased with the way the parts were expedited to me.
replaced with new part. No problems. I was pleased with the way the parts were expedited to me.
Other Parts Used:
-
Sam from Dunnellon, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
5 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
tabs broken off old vent
took off old and replaced with new.
2 minutes mostly looking for stool to stand on to remove and replace screws.
2 minutes mostly looking for stool to stand on to remove and replace screws.
Other Parts Used:
-
JOHN from DELRAY BEACH, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
existing vent grill cracked
the new part fit just right. put in place and screwed in with existing screws. like a glove.
Other Parts Used:
-
ROBERT from LEESBURG, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Exhaust Grill cracked
Simple repair. Remove 6 screws to remove old grill and replace with the new grill using the old screws.
Other Parts Used:
-
Donald from BECKLEY, WV
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The air filters were fine. The Front grill did no or could not fit. It too big however, not bu much, just enough so it will not fit the space. If it could fit the space with enough room to close the door I could screw it in
-
Cleveland from CAPE CORAL, FL
-
Difficulty Level:Very Difficult
-
Total Repair Time:More than 2 hours
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old grill vent's brackets broken off.
Removed retaining screws and broken parts; inserted new grill and screws. Fin!
Other Parts Used:
-
Marc from Annapolis, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace broken grille vent
PartSelect was the only company to show that the part came in 3 different colors. The grill vent was used to replace a cracked vent. It was simmple to slip in the new vent,but be sure to save the existing screws that holds the vent in place
Other Parts Used:
-
Harry from El Dorado Hills, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Grill vent was broken
This is a very basic job that a ten-year-old can do. Simply remove two screws at the top of the unit, remove the broken pieces of grill, snap the new one in place, and replace the screws. Oh, yes, I also cleaned out the foam and aluminum filter and cleaned some of the grease from behind the filter.
Other Parts Used:
-
Daniel from Palm Bay, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
May 30, 2019
What is a vent grille - biscuit?
For model number model no. MH1150XMS-4
Hello John, thank you for asking. This is the grille for the vent above the door on your microwave. The 'Biscuit' refers to the color. The black one is part PS392273 and the white one is part PS391973.
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS391932
Manufacturer Part Number: 8183852
Manufacturer Part Number: 8183852
Brand
Model Number
Description