Broil Element
Fits your LSE3092ST!
$512.09
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your LSE3092ST!
PartSelect Number
PS3648888
Manufacturer Part Number
MEE36592904
Manufactured by
LG
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
LG.
Part# MEE36592904 replaces these:
AP5606278, 5300W1S025A, MEE36592901, MEE36592902, MEE36592903
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Trena
November 7, 2018
I have an LG electric range. Everything works except the bake. It will turn on, but will not go above 100 degrees. Sometimes it will reach 350 but will decrease soon after. Everything else works perfect. I am not sure if i should replace the heating element, thermostat or temperature regulator. I have followed the instructions to reset the temperature already. It is not throwing any codes. LG referred me to you. Thank you!
For model number LRE30453ST
Hi Trena, thank you for your question. It is likely you might want to check your thermostat first, however you should test all of those parts to pin point exactly what is causing your issue. If all of those parts are fine, it might be your control board that is the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ronald
July 4, 2022
OVEN WILL NOT HOLD TEMPERATURE. HEATS UP BUT QUICKLY DROPS IN TEMP.
For model number LRE30453ST
Hi Ronald,
Thank you for your question. If the oven is not heating correctly, the issue may be with the oven sensor. The oven temperature sensor is the part that monitors the oven temperature and signals the electronic control board to turn the elements on and off. Before removing this part from the oven and testing it with a multimeter for continuity, unplug the oven from the electrical outlet. A normal reading should be 1100 ohms, but as readings vary from model to model, you will need to reference your owner’s manual to determine what the correct reading should be. To test it for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor. If the sensor is fine, you will need to check the elements, the electronic control board and the wiring between the parts to see which one is causing the issue. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3648888
Manufacturer Part Number: MEE36592904
Manufacturer Part Number: MEE36592904
Brand
Model Number
Description