Hose,Inlet
Fits your WM2650HVA!
$42.89
In Stock
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Fits your WM2650HVA!
PartSelect Number
PS3527262
Manufacturer Part Number
5214ER4001J
Manufactured by
LG
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
LG, Kenmore.
Part# 5214ER4001J replaces these:
AP4440646
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
watereaking from the hot inlet valve,and the clamp and hose got corroded from the bleach holding compartment
removed two screws from back of front load washer slid the top back two inches and pulled up removing the top.Turned the water off at the shut off . Used the pliers to remove the clamps on the hose to replace. Put the new hose on with new clamps. Un screwed the two screws holding the inlet valve and removed the hose and clamp. Put the new part in and put the hose and clamp back on then put the two screws back that hold the inlet valve.Total time to unpack the parts and install 7 minutes. All I did was google it on youtube and order the parts from this site which only took 2 days and tah dah .
Other Parts Used:
-
Jennifer from Hagerstown, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
RICHARD
March 16, 2018
I have two questions so i can determine what parts to order. 1. The soap, bleach and even fabric softener to not dispense into the washer and just stay in the reservoirs . 2. About every 3rd or 4th wash the ie code pops up and i have checked that inlet hose is not clogged or bent and just restart the wash and it will work fine and then 2 or 3 loads later it comes on again . Thanks very much and i appreciate the help in figuring out what parts i need
For model number WM2077CW
Hello Richard, Thank you for your inquiry. Since the IE error code does indicate an inlet water supply error and you've checked your hoses, Check the water supply faucets behind the washer to make sure they are fully open. Then test the water inlet valve with multimeter to see if has continuity. If it does, it may be the electronic control board. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3527262
Manufacturer Part Number: 5214ER4001J
Manufacturer Part Number: 5214ER4001J
Brand
Model Number
Description
Kenmore
79628862700
Washer
- Kenmore Washing Machine Model 796.28862700 (79628862700, 796 28862700) Parts
Kenmore
79628869700
Washer
- Kenmore Washing Machine Model 796.28869700 (79628869700, 796 28869700) Parts
Kenmore
79629872700
Washer
- Kenmore Washing Machine Model 796.29872700 (79629872700, 796 29872700) Parts
Kenmore
79629877700
Washer
- Kenmore Washing Machine Model 796.29877700 (79629877700, 796 29877700) Parts