This part is used to keep your tub upright and somewhat level during the different cycles.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
General Electric, Hotpoint.
Part# WH16X10141 replaces these:
AP5607528, WH16X0545, WH16X545
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary Lou
January 24, 2018
I think i need to replace the rod and spring assembly. While i am at it am going to replace all 4 cannot find my model number will the ones listed here work.
For model number WLRE4500G0WW
Hi Mary Lou,
Thank you for your question. Yes it will. You will need two of these white ones and two green ones. I have linked the part information for your green ones down below for you. Good luck with your repair.
I need new suspension rods. What part # would that be? Thx
For model number LWD70AW
Hello Ginger, Thank you for your inquiry. We have researched the model number you have provided and show that this model has suspension springs rather than rods and the part number would be PS11742251. Good luck with your repair.
Hi Roy, Thank you for the question. Most customers have been able to do the repair on their own. You may need to have an extra pair of hands to help support and lift tub. Also make sure you disconnect the power. Then remove the front and top panel. Lift the tub and remove the old rods. Install the new ones as you remove the old ones from the unit. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Your washer uses 4 tub dampening straps. It is recommended to replace all 4 at the same time. They keep the tub in the center of the cabinet and are sold individually.
This part is a replacement socket rod support for your washer. The socket rod support is found at the top of the washer frame in the front part of the washer. It supports the suspension rod, so the rod can prevent the tu...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3511633
Manufacturer Part Number: WH16X10141