Product Description
Suspension Rod Kit - Set of 4 Specifications
The suspension rods are used to keep the drum assembly upright. The rods attached to the four corners on top of the cabinet to the base of the drum. When a rod breaks, the drum will be tilted which will cause the drum to be loud during different cycles.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Whirlpool Washer Suspension Rod Kit - Set of 4
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Maytag.
Part# W10440786 replaces these:
AP5306960, W10368626, W10368627, W10440739
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Kevin C - November 13, 2021
Verified Purchase
Only part of the problem
Error code “UL”. Replaced springs to only find out that the bearings and shaft were the main culprit and needed to be replaced.
Richard W - May 29, 2020
Verified Purchase
Works great
We do at least one load of laundry every day, and our machine would be un-level two or even three times per load. It was very annoying. We were really hoping our washer always being un-level would be fixed by installing these, and it's been about a week and it was only un-level once, and that time it really was un-level. We're very pleased.
Ivan D - August 2, 2018
Verified Purchase
Easy repair. Parts as expected.
The parts were exactly what we needed to repair our Maytag Bravos washing machine. It once again is operating as new. No more UL code. Parts arrived in less than 24 hrs. Took our son only 30 minutes to replace the old rods with these new ones. Wife's very happy.
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lisa
January 2, 2018
When my washer is in the last spin cycle about the last 10 to 7 min it goes off balance and shakes violently and is loud. Is this something easy to fix.
For model number WTW8500BW0
Hi Lisa, Thank you for the question. I suggest checking the Suspension Rods, PartSelect Number PS3502193 over for damage first. if the roads and the supports on the rods, PartSelect Number PS3502189 are all intact, you may need to replace the Basket Hub Kit,PartSelect Number PS11723155. Good luck with the repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Michael
July 25, 2019
What all comes in a suspension rod kit.Do i need to buy anything else?
also is there a way to tell if the suspension rods at bad?
thanks
For model number WTW8540BW1
Hello Michael, thank you for your question. The kit comes with the 4 rods, and caps - everything you need for installation. Usually if the tub is tilted, or the wash is always unbalanced that is a good indication that the suspension rods are bad. I hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Dee
July 30, 2019
A repair man told me yesterday that my cabrio platinum needed new suspension rods (shocks) to spin out without the washer leaving the laundry room. He said the rods are not sold in a complete 4 pack... only separately, but that is what you are offering here. this looks like an easy repair i can handle myself and would save me hundreds of dollars over buying all the parts separately. please advise. thanks
For model number WTW8540BW1
Hello Dee, thank you for writing. This Set of 4 Suspension Rod Kit is the compatible replacement for your model. Good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Michael
January 21, 2018
My spin is working but it sounds like the bearings have no grease, you can hear the noise thru doors and walls. It isn't a knocking or unbalance type noise. I believe the bearings got wet and lost the grease. The shaft might be scarred from it. What do you think?
For model number MVWB850YG1
Hi Michael, Thank you for the question. This does sound like an issue with the bearings. I suggest replacing the PartSelect Number PS3503261, Tub Seal and Bearing Kit. This kit includes the shaft, 3 bearings, seals , grease, adhesive and the spanner nut, which is NOT sold separately. Also may require a bearing driver tool to install. PS3503307. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Corina
July 2, 2019
Washer says UL. Tried moving clothes around and it still will not work.
For model number WTW8600YW1
Hi Corina,
Thank you for your question. The UL error code stands for unbalanced or off-balanced load which means the control has recognized the the tub is off balance during the spin cycle. If you have already rearranged the clothes and the code is still coming up, then the stator may be cracked. This would causing the unit to become unbalanced during the spin cycle. You will need to remove the rotor from the bottom of the washer and inspect the stator for cracks in the white plastic housing, even a hairline crack can cause this problem. If you find the stator is cracked you will need to replace it. Also, the suspension rods could be worn and you will need to inspect them to verify if they are causing the issue. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
January 27, 2022
When you open the glass lid and look at the drum, it is off center from the round opening of the metal top. The drum is offset to the back left hand corner. what is the problem?
For model number MVWB980BG0
Hello James, thank you for writing. There should always be some give, you should be able to move it back and forth with it always laying in center when at rest. However, it is predominantly leaning towards the side then you should be looking at the leveling feet PartSelect Number PS11753762 or Suspension Rod Kit - Set of 4 PartSelect Number PS3502193. We have an installation video for you to access. We hope to hear from you soon.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jeff
July 4, 2019
My model is the bravo xl, will it need a larger rod than the standard model? I ordered a set from amazon and they were too small by about 2".
For model number mvwb850yw1
Hello Jeff, thank you for writing. This Suspension Rod Kit part PS3502193 is the correct replacement for the model number you provided, MVWB850YW1. It is designed to function on the unit. We hope this answers your question.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
February 22, 2018
When spin cycle starts (works) but it sounds like the bearings bad. And now we notice what looks like grease sprays around the right side floor. It looks like the grease just flew out. The spin cycle is so loud you can hear the noise thru doors and walls. It does not knock or is unbalance type noise. Thoughts? If you can suggest parts, are there instructions available to show how to replace the suspect parts?
For model number WTW8600YW1
Hi Richard, Thank you for the question. If it is a rubbing or grinding noise I suggest checking the Basket Hub Kit, Part Number: PS11723155 for any wear or damage. The basket hub is located under the agitator. If the hubs are good you will need to replace the bearing. The bearing is only sold as part of the outer tub assembly Part Number: PS3503107. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nolberto
April 5, 2018
What part can i replace my suspension rods with here ?
For model number Wtw8500br0
Hello Nolberto, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS3502193. Hope this helps!
Was this helpful?
Thank you for voting!
Raelyn
April 30, 2018
Hi my washer is leaking would the suspension rods cause that?
For model number WTW8600yw
Hi Raelyn, Thank you for the question. If the suspension rods are defective and the drum is not stable, it can cause wear on the seals and it will leak. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3502193
Manufacturer Part Number: W10440786
Manufacturer Part Number: W10440786
Brand
Model Number
Description