Drain Pump - 120V 60Hz
Fits your GTUP240GM4WW!
$178.07
Special Order
Fits your GTUP240GM4WW!
PartSelect Number
PS3501453
Manufacturer Part Number
WH23X10040
Manufactured by
GE
Troubleshooting
This part fixes the following symptoms:
Will not drain
This part works with the following products:
Washer Dryer Combo, Dryer, Washer.
This part works with the following products:
General Electric, Kenmore.
Part# WH23X10040 replaces these:
AP5306354
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Chris
December 11, 2019
My washer starts filling, but the water drains out. If i unplug it it fills properly. It will work fine for a couple of loads, then you have to unplug it again. Is the drain pump sticking open?
For model number gud277essj0ww
Hello Chris, thank you for your question. We would recommend testing/replacing the water inlet valve, drain pump and the water level pressure switch. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Glenn
October 10, 2022
Drain pump does not engage or pump the tub empty. The pump spins freely and the magnet on the rotor can be felt to be working through the plastic housing. Is the outer electromagnet known to fail? I cleaned the rust off of it and reinstalled yet it still does not work.
For model number GTYW460BMMWW
Hello Glenn, thank you for your question. According to our research on the model, the Drain Pump appears to be faulty and you may need to replace it. We hope this information is useful.
Was this helpful?
Thank you for voting!
Alan
29 days ago
Washer wont spin or change cycles it clicks by lid switch which I replaced today what should I do next?
For model number Gud27essm1ww
Hi Alan, thank you for getting in touch. Based on the description that you have provided, we would recommend replacing the user interface board, part number PS12342920, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3501453
Manufacturer Part Number: WH23X10040
Manufacturer Part Number: WH23X10040
Brand
Model Number
Description