Product Description
Circulation Pump and Motor Kit Specifications
This kit includes the 2 o-rings.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Dishwasher Circulation Pump and Motor Kit
Troubleshooting
This part fixes the following symptoms:
Noisy | Leaking | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Kenmore.
Part# 154844101 replaces these:
AP5272381, 1940267, 154844101, 154483001, 154574601, 154579701, 154700001, 154719201, 154795001
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
HAMIDREZA A - August 20, 2021
Verified Purchase
Easy repair. Original part
Thanks for supplying original part.
T O - June 5, 2021
Verified Purchase
Quick shipping. Perfect fit
Perfect fit back-up and running!
Desmond M - October 1, 2020
Verified Purchase
Fixed the issue
Did the job. Very easy install. My pump had warped and needed replacing. It fit perfectly and was done in under 10 minutes.
Corey N - June 8, 2019
Verified Purchase
Just the right part.
The part was just what we needed and the response to our question on confirmation of this being the part needed was excellent. Our only issue was with shipping. The original information was that the part was being shipped via Purolator and would be 3-5 days. When the item shipped, it was sent Canada Post with a estimated arrival date of 10 days later (6 business days). Thankfully it arrived on the Friday instead of Monday (1 week delivery). Upon opening the box, we found the part wrapped loosely with a sheet of plastic which included a single row of unpopped bubbles and a couple of broken off plastic bits. The broken bits weren't important for the operation of the pump and it worked just fine. Purchasing experience = 5 stars, customer service = 5 stars, website = 5 stars, shipping = 1 star. I would order further items from PartSelect with lower expectations on arrival time and maybe a note to wrap the part a bit extra.
Christian P - June 4, 2019
Verified Purchase
Parfait
Piece correspond au produit. Tous fonctionne parfaitement.
Don C - May 20, 2019
Verified Purchase
Could not be happier
Shipping was good and the part fit and worked perfectly. Dishwasher is quite and runs like new. The DIY video was awesome.
DJ M - March 18, 2019
Verified Purchase
Part worked as expected
The video was excellent and the installation was rather simple. Problem fix for way less than a new dishwasher.
Jon V - February 13, 2019
Verified Purchase
Great part easy fix.
Part came in a decent time span. It was cheaper than my local supplier. It was as expected and a great easy fix. Nice and quiet now.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.2 / 5.0, 6 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
replaced dishwasher motor
Single-handedly. Tipped dishwasher on its side for easy access to water and electric connections. Went back together with no problems or leaks, washes quiter than ever.
Other Parts Used:
-
John from Herndon, VA
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
48 of 68 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water at the end of cycle
Remove dishwasher from cabinet flip on it's back. Remove two wire connectors, two torx screws pull pump out and replace very simple. Parts select were great and very fast to ship parts
Other Parts Used:
-
Joe from Prospect, KY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
28 of 35 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was making a loud whining or screeching sound on wash cycle
The short PartSelect instructional video perfectly showed how to replace the circulation pump and motor. The replacement took about 2 hours. Simply flipped circuit breaker off, disconnected the water and drain hoses under the sink and pulled the dishwasher out. The electrical wire was long enough to accommodate doing this without having to disconnect the wiring in dishwasher. And turned the dishwasher over on its back. The removal and re-installation of the pump-motor assembly was the easiest and quickest part. It came out and the replacement from PartSelect went in exactly as shown in the video. Dishwasher was put back in place and reconnected. Ran perfectly and quietly.
Other Parts Used:
-
George from FARRAGUT, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers, Wrench (Adjustable)
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
None
Only thing I did Different from the Install video was I put a towel down and laid the dishwasher on its side with wire connectors up, this made it easier to press the pump into the housing, also I used vaseline on the O Rings . 10 min job .
Other Parts Used:
-
Todd from PERRYSBURG, OH
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud squeal while washing
Watched your video. Shut off water. Pulled power plug. Disconnected water and drain tube. Machine is lagged to the floor, as the counter top is Cambria, so have to remove two lag bolts. Slid out machine and turned on its side. Disconnected 2 wire harnesses. Removed 2 Torx screws, pulled pump, cleaned the unit and installed new pump. Reversed steps, and hooked all back up. Instructions on video were exactly accurate. Machine is now quiet, and dishes are getting cleaner.
Thank you!
Thank you!
Other Parts Used:
-
Kevin from BOZEMAN, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was making a loud roaring noise (almost) the entire wash cycle
I followed the instructions on the Parts Select website. Everything worked just as described. However, I ran into a small snag when I tried to remove my dishwasher. The two tabs that you secure on the underside of you counter were getting caught on the underside of my countertop. After I realized that was the issue, I slightly bent them and I was able to slide the dishwasher out. Another helpful hint is to outline the spot where the tabs are (on the underside of your counter) with a pencil or pen, that way you will know exactly where to reinstall the dishwasher.
Other Parts Used:
-
Stevie from CARSON, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Corey
May 21, 2019
Good day! I have already pulled the pump out and your video nails the process and your pricing is very competitive (especially for those of us in Canada). I was wondering however if you are able to confirm that this is the part I need to replace. Our dishwasher was leaking and upon inspection, the water was coming from the pump area and must have had a slow leak for some time as the spring clamp has some rust on it. Once I removed the dishwasher and was able to look a bit better, the water seems to be coming out of a hole found up in what looks like vents (5 rectangular openings in the pump body right outside of the inserted portion.) I can dump a container of water into the dishwasher and it comes out of this hole without the dishwasher even running (or plugged in.) I don't want to replace an expensive part such as this if it's not the issue. Appreciate any thoughts. Thanks in advance.
For model number 58715313000A
Hello Corey, Thank you for the question. With the information provided it does sound like the pump is damaged and will need to be replaced. Thank you for your inquiry, good luck with this repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Gordon
June 6, 2019
After the drain pump completes and the circulation pump tries to start, the panel shows pf and the pump won't start. Is there an internal overload switch on the pump motor? Should we check for a pump blockage or other possible cause?
For model number GLD2445
Hello Gordon, thank you for inquiring. The PF code stands for power failure and will appear when the power has been interrupted to the unit. To clear this, press the START/CANCEL button. If this does not clear the code and resolve the issue, then you will need to replace the Electronic Control Board part PS234516 for your model. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Greg
December 11, 2018
Water is not flowing. Dishwasher makes a growling sound. I suspect it is the pump assembly.
For model number FGHD2433KF1
Hi Greg, thank you for your question. It does sound like it could be. I would suggest first checking your spray arms and filters for any clogs that might be obstructing the water at all. If you find that there is nothing clogging the tubing and wash parts, then I would suggest taking a look at your pump being the issue. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Scott
December 10, 2019
The dishwasher is making a growling sound during certain cycles, how do I tell if it’s the drain pump of the circulation pump?
For model number PLD4375RFC3
Hello Scott, Thank you for the question. If the sound is at the end of the cycle it is more then likely the drain pump. If the noise is during the wash cycle, you may need the circulation pump. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brent
March 26, 2020
I have run the water/service test and received error code hs (hall sensor), is this related to the pump or the drain?
For model number FGHD2433KF0
Hello Brent, thank you for your question. The halls sensor is part of the motor which is PartSelect Number: PS3501022. I hope this helps.
Was this helpful?
Thank you for voting!
Joe
October 30, 2019
How difficult is it to replace this part and how long should it take me.
For model number ps3501022
Hello Joe, Thank you for the question. Here is a link to the How to Video. Level of difficulty and time would depend on your diy experience. Hope the video helps!
https://www.youtube.com/watch?v=_rWJ63Z7Ibg
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3501022
Manufacturer Part Number: 154844101
Manufacturer Part Number: 154844101
Brand
Model Number
Description