Part Location Diagram of WH44X10288 GE Lid Lock & Switch Assembly
See part 111 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Lid Lock & Switch Assembly

★★★★★
★★★★★
2 Reviews
$133.60
  Special Order
PartSelect Number PS3496878
Manufacturer Part Number WH44X10288
Manufactured by GE
Product Description

Lid Lock & Switch Assembly Specifications

The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a cycle or open your washer door. It is mostly black in color and made of plastic. This part measures approximately 3.75 by 3.5 inches.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Lid or door won’t close
This part works with the following products:
Washer Dryer Combo, Dryer, Washer.
This part works with the following products:
General Electric, Kenmore.
Part# WH44X10288 replaces these:
AP5270191
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
4.5
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 1 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Washer would not spin or drain
I went to You tube sight to see how I can remove front of washer so I could inspect inside and see if the problem was visible. A butter knife easily released the tabs that hold the front of washer on. My wife in the mean time found a you tube video that showed the same problem and I ordered the part right away. It showed just two screws and a plug that had to be removed. I always buy my parts from part-select because the quality and speedy delivery and tracking is great! This was an easy fix!
Other Parts Used:
  • Randy from CANTON, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

9 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
December 20, 2017
Install lock switch on washer light flashing do i need reprogram
For model number Gtup240em5ww
PartSelect logo
Hi Bob, Thank you for your question. Without knowing what light is flashing I can only guess. I am assuming that it is your lid lock that is flashing, usually to get rid of that you would press and hold the Start/Cancel button for about 30 seconds and that would stop it from flashing. I hope that helps. Good luck with your repair.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Peter Burgdorfer
March 12, 2018
This part is an assembly,correct ? It doesn't provide a photo
For model number GTUP240EM5WW
PartSelect logo
Hello Peter, thank you for your question. This part is the locking switch, and the switch housing. It does not include the wire harness, but that part shouldn't have to be removed unless there is damage to the wires themselves. I hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Charles
March 28, 2019
Water start to fill and shut off never fill all the way
For model number gtup270gm4ww
PartSelect logo
Hi Charles, Thank you for your question. If the washer is filling part way and shuts off the issue could be the door latch lid lock. This is a common issue and the reason for it maybe either electrical or mechanical. The lock will need to be replaced. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Seth
December 30, 2019
Does this include the lid sensor? It's about a 2inch plastic sensor that is wired to the lid lock.
For model number GTUP270EM1WW
PartSelect logo
Hello Seth and thank you for writing. Yes, it is part of the assembly PS3496878. We hope this helps. Please contact us anytime if you require further assistance.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Art
November 12, 2017
Is this part door lock switch returnable?
PartSelect logo
Hi Art, Thank you for your question. We do have a 30 day return policy. Parts must be in resalable condition to qualify. All electrical parts must not have been installed. Returned items that have been installed will not be returned to customer. Customer is responsible for shipping returned parts back to PartSelect. Any item received after 60 days of shipment date will not be refunded. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Joshua
September 18, 2019
Washer slows to a trickle while filling when the lid is closed. A few seconds after opening the washer fills as it should. Several seconds after reclosing it slows to a trickle again. All signs point to lid switch. Sound accurate?
For model number GTUP270EW5WW
PartSelect logo
Hello Joshua thank you for writing . Sounds very accurate ! Good Luck with your repair

1 person found this helpful.

Was this helpful?
Thank you for voting!
Simon
December 2, 2019
My washer will not start. I replaced the start switch and I already replaced the lid sensing thing that senses when the lid is closed that did not work and now I am looking at the lid lock switch is that my only option left? It is flashing on the control panel.
For model number 2671532110
PartSelect logo
Hi Simon, Thank you for your question. If you have already replaced the start switch and the lid sensor, then you should check the door latch lid lock, part number PS3496878. The door latch lid lock is to lock the door on your washer when the appliance is in use. Your washer will not start if your door is not locked. If your latch is broken, you may not be able to start a cycle or open your washer door. You will need to test the door latch with a multi-meter. With your multi-meter on the Rx1 setting, touch the probes to the terminals, then press and hold the switch button down. You should receive a reading of zero. If you do not receive this reading, you will need a replacement lid switch.I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Dev
July 25, 2021
Hello, I have GE washer dryer combo model: GTUP240EM1WW, my washer working but it won't spin, can you please let me know what is wrong?
For model number GTUP240EM1WW
PartSelect logo
Hello Dev, Thank you for the question. This could be a defective Lid Lock Switch, PartSelect Number PS3496878. The door latch lid lock is to lock the door on your washer when the appliance is in use. We hope this helps!

Was this helpful?
Thank you for voting!
Aidan
October 28, 2021
The lid lock light is flashing and the machine won’t start however nothing seems physically broken on the lid lock, is there anything I can do to get it started?
For model number GUAP270EM1WW
PartSelect logo
Hello Aidan, Thank you for the question. The Lid Lock may not show physical damage to be defective. The switch could be defective in the Lid Lock and causing it not to send the signal the Lid it Locked or allow it to actually lock. We recommend replacing the Door Latch Lid Lock. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3496878
Manufacturer Part Number: WH44X10288
Brand
Model Number
Description
Kenmore
2661532110
Washer Dryer Combo - LAUNDRY CENTER
General Electric
2661532210
Washer Dryer Combo
General Electric
2661532211
Kenmore
2661532212
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2661532311
Washer Dryer Combo - LAUNDRY CENTER (ELECTRIC)
Kenmore
2661532312
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
2661532412
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2661532413
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2661532513
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
26715321
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532110
Washer Dryer Combo - LAUNDRY CENTER
General Electric
2671532210
Washer Dryer Combo
Kenmore
2671532211
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532212
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532311
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532312
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532412
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
2671532413
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361532110
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361532412
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
36361542
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361542211
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361542310
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361542410
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36361542411
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371532110
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542211
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542310
Washer Dryer Combo - HOME LAUNDRY COMBO
Kenmore
36371542410
Washer Dryer Combo - HOME LAUNDRY COMBO
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service