Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Art L - May 22, 2021
Verified Purchase
easy, fast, cheaper than a service call
Perfect repair, my freezer stopped freezing. the display was garbled and the alarms didn't work. unplugged the freezer,pried out the old, plugged in the replacement. Power on and all was right with the world. well my little corner of it anyway.
★★★★★
★★★★★
Douglas L - March 21, 2019
Verified Purchase
GE upright freezer control
Part came faster than I was quoted, well packaged. Exact part.Thank you
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
would not respond when button was pushed
replaced control unit (plugged into door)
Other Parts Used:
Norman from COVENTRY, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer has power but not cold
This happened before, when we loose electricity it blows the computer module. Pull the bad one out. When the new one arrives, unwrap and plug in! That easy! Viola, freezer will now work. Set the temp control as needed.
Other Parts Used:
CINDY from KALAMAZOO, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ez control failed after lightening storm
Removed old one & replaced
Other Parts Used:
James from NORMAN, OK
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Temp control and interior light stops working every 4 to 5 days
pulled out the old control on the front door and inserted the new control. The only crucial part is to line up the pins on the bottom edge of the control to make sure none are bent during installation. The problem I was having would only appear every four or five days, so far the freezer has been plugged in with new control for three days but so far so good.
Other Parts Used:
Stan from Brush Praire, WA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dennis
January 19, 2018
How does a person replace this part (ez sensor). Located on the door
For model number FUF14DVARWW
Hello Dennis, Thank you for your inquiry. Use a putty knife or flat blade screwdriver to pry out the old board. You may want to use tape or a plastic card to protect the freezer finish. Align the pins on the new board with connectors on the door and carefully snap the board into place. Plug the freezer back in and confirm the new board works. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Doug
April 25, 2018
Did Frigidaire make this model for GE Whirlpool ?And will other controls work?
For model number FUF 21svcrww
Hello Doug, thank you for your question. This is a GE appliance, but the control they use is part number WR55X11084 which is a GE part. Per your model information, this part will work with your appliance. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
James
June 27, 2021
EZ control has quit working. It has an unreadable display. We had a storm on the night when it quit working. The freezer stays cool like a refrigerator, but does not get cold enough to keep food frozen. The alarm never came on. Does the control need replaced or could there be other problems?
For model number FUR21SVDRWW
Hello James, Thank you for the question. Normally this is an indication the Board may have shorted out during the storm and needs to be replaced. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nancy
August 26, 2021
Bought this freezer used. No instruction manual and I see it is no longer available. When purchased the temp control on front was set on 4 and has been working well until now. It is kept in a garage (so it is warmer there) and has now dropped to #2. Food is still frozen but worried it is on the way out. When I try to raise the temp to a higher no. An "l" shows up and goes back to "2". Any advice? Thanks
For model number FUF14SVARWW
Hello Nancy , Thank you for the question. This normally indicates the EZ Set Control is defective and may need to be replaced. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3491624
Manufacturer Part Number: WR55X11084