Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brad
April 2, 2018
Washer won't agitate but will fill up with water. I replaced the lid switch, belt is in tac and spins, tub spins freely, and i've try to reset it multiple times. Which it worked before but nothing now. Any idea what this might be?
For model number GTWN4950L0WS
Hi Brad,
Thank you for your question. If the washer is not agitating, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the belt, the lid switch, the link fuse, the hub nut, the tub dampening strap and the shaft and the mode shifter assembly. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Hernan
April 9, 2019
Hello, my washer doesnt agitate and spin. I have verified the pump works, no clogs and reset washer several times. I've noticed the led flashes red 3 times. Need advice before I order a $299 motor drive. Thanks
For model number GTWN4250M1WS
Hello Hernan, thank you for inquiring. For this symptom you will want to replace either the 6-Rib Drive Belt part PS1482278, the Tub Dampening Strap part PS271100, or the Split Ring part PS1766022. We hope this helps.
Was this helpful?
Thank you for voting!
Roger
August 6, 2021
Our washer is very noisy during a washing cycle, especially when it spins. It sounds like the motor bearings are shot - is this a common issue? And will simply replacing the motor fix this issue?
For model number GCWN5050M0WS
Hello Roger, Thank you for the question. Normally the noise is caused by worn and defective Tube Bearing, Tub Bearing Washer, Split Ring, Tub Seal, Hub Washer, Thrust Washer or Hub Nut. We suggest checking the parts for wear or damage. We hope this helps!
Red light on motor flashes all the time. Machine won't run, is the motor the problem?
For model number GRWN5150M0WS
Hello Sebra, Thank you for the question. If you have one flash constantly, it indicates motor failure. We hope this helps!
Was this helpful?
Thank you for voting!
Rich
March 20, 2018
Is this the right motor for this washer? GE top loader, high efficiency. About 9 10 years old.
For model number GRWN5150M0WS
Hello Rich, thank you for your question. Yes, the drive motor part number WH20X10066 is the correct motor for your specific appliance! I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3487337
Manufacturer Part Number: WH20X10066