ROTARY SWITCH 4TEMP
Fits your HTDP120GD3WW!
$28.91
Special Order
Fits your HTDP120GD3WW!
PartSelect Number
PS3487204
Manufacturer Part Number
WE4M520
Manufactured by
GE
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
General Electric, Hotpoint, Whirlpool.
Part# WE4M520 replaces these:
WE04M0269, WE4M269, WE4M401
Customer Repair Stories
Average Repair Rating: 1.8 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Part Didn't Work
I have ordered this part twice from different providers. This time there were more connections than on the older one. Still haven't gotten the dryer running.
Other Parts Used:
-
Lorena.Yvonne from RIVER OAKS, TX
-
Difficulty Level:Very Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
RICHARD
June 20, 2023
Manufacturer Part # WE4M520/4 temperature switch
Is this the part that controls the temperature for my 11 year old gas dryer and how hard is it to install?
For model number GTDP300GM0WS
Hi Richard, thank you for getting in touch. The part mentioned is the correct temperature control switch for your model. The temperature control switch is located behind the control panel, you can easily access and replace it by removing the rear panel first, disconnecting the wires for the old switch, and then installing a new one. Let us know if you have further questions!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
May 13, 2019
Gas dryer blow fuse at breaker box within 20 seconds on startup. Replaced air duct.Cleaned lint from inside. just need direction as to possible cause or causes. regards, gary
For model number SLLSR40GG0WW
Hello Gary, thank you for your question. We would recommend testing the Cycling Thermostat - 4 Wire Part Number: WE4M181, High Limit Thermostat - L290-40F Part Number: WE4M80 and Bias Thermostat Part Number: WE4M216. The most likely issue is a bad fuse/thermostat. If that isn't the issue we would recommend testing the heating element, door switch and belt switch. I hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3487204
Manufacturer Part Number: WE4M520
Manufacturer Part Number: WE4M520
Brand
Model Number
Description