![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Door Shelf Retainer Bar
$97.12
Special Order
PartSelect Number
PS305127
Manufacturer Part Number
WR71X10080
Manufactured by
GE
Product Description
Door Shelf Retainer Bar Specifications
This part is a replacement door shelf retainer bar for your refrigerator. The shelf retainer bar connects to the end cap on either side, and the end caps connect it to the refrigerator door. The retainer bar allows you to store items in the refrigerator door, without them falling out when the door is opened or closed. If your door shelf retainer bar is broken or missing, you will need to replace it. Some refrigerators contain multiple door shelf retainer bars, as well as multiple end caps. Keep in mind that this door shelf retainer bar is sold individually. It is made of white plastic and is approximately 23 inches in width.
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint.
Part# WR71X10080 replaces these:
AP2072065, 306088, WR71X2360, WR71X2554
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door Retainer Bar and End Caps were missing
Placed bar into end caps and slide end caps into slots in the door. Took about 1 minute! Very easy!
Other Parts Used:
-
Angela from Minneapolis, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
32 of 35 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
we had a broken clip and bent door guards
First we removed he old parts and just popped out the new ones out of the plasric bags and put them in place it was awesome. and so much cheaper than going through a local parts store. I would definitely use again. Thank you so much.
Other Parts Used:
-
Elizabeth from Greenacres, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
4 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
End piece broke off from refrigererator door shelf.
Removed shelf from door. Attached endpiece manually . Replaced shelf with both endpieces in the door. That was it! Thank you!
Other Parts Used:
-
Miriam from New York, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old retainer bar was dented outward and did not keep condiments in place
I detached the end caps from the fridge and the old bar. They are plastic pieces which do not have any screws, just a little plastic lever that is easily removable with a screwdriver. I then fitted the end caps to the new retainer bar and attached to the fridge.
Other Parts Used:
-
Heather from YAKIMA, WA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cynthia
July 9, 2019
I am looking for the bottom bar and the 2 side holders which i found but a small part of the plastic where the holders snap into the door of the regrig is also broken, so i think the snap on part will not hold since a part of plastic of the door is also broken. Do you think i will need a entire bottom door. It is for the garage so i don't want to spend too much
For model number TBX18SA
Hello Cynthia, thank you for your question. The inner plastic panel of the door itself is probably broken. The part that the end caps and bar snap into. That part number is WR77X609. Unfortunately, that part has been discontinued. We would recommend checking online to see if you can locate the part in stock from another source. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS305127
Manufacturer Part Number: WR71X10080
Manufacturer Part Number: WR71X10080
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)