Blade - Middle
Fits your ESF25KGTBCC!
$19.89
Special Order
Fits your ESF25KGTBCC!
PartSelect Number
PS292309
Manufacturer Part Number
WR17X1362
Manufactured by
GE
Product Description
Blade - Middle Specifications
Also called Moving Dispenser Blade.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Kenmore, Hotpoint, RCA.
Part# WR17X1362 replaces these:
AP2064307, 293116, WR17X1007
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 3 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
meatal parts were rusted
the part is fairly easy to take apart, however pay close attention to how things fit and go together. It took me sometime to figure the reassembly out due to my lack of close attention to taking it apart. other than that it is simple.
Other Parts Used:
-
Allan from Pleasanton, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Wrench set
26 of 45 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker would not crush ice.
Removed tray from ref. Removed from cover from tray useing a screwdriver. Removed housing, took old parts out. Make sure you take the parts out in order and put new parts back in same order as old parts.
Other Parts Used:
-
Kelly from Canandaigua, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
7 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replace Dispencer blade
Removed the exterior 4 screws and 1 holding the metal rod underneath. Sepearated the plastic parts pulled out the dispensing mechanisim. Removed the lock washer, then removed the spacers and blades. Put the new blades in with the spacers and reversed the other steps and done.
Other Parts Used:
-
Leonard from Hawthorne, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
0 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
July 29, 2019
Had a problem with frozen ice blocking the final dispensing, broke it free and now it will only dispense chopped ice??
For model number GSC23LSRBSS
Hi John,
Thank you for your question. If it appears you are getting only crushed or chopped ice from the dispenser, check the following:
• It is normal to get a slight amount of crushed or broken ice cubes before or while dispensing cubed ice. This is most common after crushed ice was used and you then select cubes. The remaining chips in the crusher blades or the bottom of the bucket get picked up as cubed ice is dispensing.
• When cubed ice is selected, dispensing cubes requires energizing a lever behind the ice bucket to open a flap and allow whole cubes to come out. If an ice cube gets behind the ice bucket, this can prevent the lever from working. Remove the ice bucket and check for ice that may have fallen behind the bucket.
• If no ice cubes are behind the bucket, try to dispense ice with the bucket removed. Shut the door, press the ice dispenser and listen for a loud snapping noise. If no snap is heard service will be needed. If you hear a snap, reinsert the bucket and try Cubed ice again. If still no cubes, then check for frozen ice in the bucket.
To remove and check the ice bucket:
1. Pull the ice bin out by lifting it up in front and sliding it forward.
2. Check for and remove clumped or shaved ice in the bin.
3. If ice remains, run the bin under warm water until the ice melts completely. Dry the bin thoroughly.
4. Reinstall the ice bin by pushing it all the way back against the freezer wall.
5. Allow time for Icemaker to cycle again – to make cubes.
6. Select CRUSHED ICE and then CUBED ICE.
7. Try the dispenser again
Here is a link from our website that you may reference if this is not this issue, https://www.partselect.com/Repair/Refrigerator/Not-Dispensing-Ice/. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS292309
Manufacturer Part Number: WR17X1362
Manufacturer Part Number: WR17X1362
Brand
Model Number
Description
Kenmore
36358072893
Refrigerator
- Kenmore Refrigerator Model 363.58072893 (36358072893, 363 58072893) Parts