![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Motor and Circulation Pump
Fits your 402061!
$584.57
Special Order
Fits your 402061!
PartSelect Number
PS260803
Manufacturer Part Number
WD26X10015
Manufactured by
GE
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric.
Part# WD26X10015 replaces these:
AP3192237, 912037, WD26X10018
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patricia
April 8, 2018
Dishwasher fills with water but does not circulate the water. After the allotted time for circulating (washing), the water is pumped out properly. Help!
For model number PDW8200J03BB
Hello Patricia, thank you for your question. If the unit is filling and draining properly, but not washing the dishes, the Motor and Circulation Pump WD26X10015 would have to be replaced. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Susan
July 30, 2021
There is about 1 to 2 inches of water at the bottom of the dishwasher once the cleaning cycle is completed.
For model number PDW8200J00WW
Hello Susan, Thank you for writing. It would seem that a piece of debris from mineral deposits may be stuck in the inlet water valve. The opening in the valve is very small and minerals may become lodged in there and cause a slow leak of the water into the dishwasher tub. You can look inside the dishwasher at where the water enters the tub to see of there's a very slow leak. When things are working correctly (inlet valve not leaking) it should be dry. If you see any water coming in, then the Inlet Valve is leaking. Replacment is the best option in this case. PartSelect Number PS259369
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Frank
November 24, 2023
THUMPING NOISE, IT FILLS AND OPERATES NORMALLY
For model number PDW8480JOOSS
Hello Frank, thank you for reaching out. Based on our understanding, we would recommend checking the lower spray arm, part number PS1020205, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
Related Parts:
Bill Huffman
November 26, 2018
Pump making strange noise when water pumping out. Washing good.
For model number PDW9280J00SS
Hello Bill, Thank you for the question. The noise would most likely be a faulty Drain Pump,PartSelect Number PS260804. The pump is not repairable and will need to be replaced. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS260803
Manufacturer Part Number: WD26X10015
Manufacturer Part Number: WD26X10015
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)