Normal Duty Door Spring
Fits your 3631435196!
$72.52
Special Order
Fits your 3631435196!
PartSelect Number
PS259712
Manufacturer Part Number
WD1X1413
Manufactured by
GE
Product Description
Normal Duty Door Spring Specifications
Sold Individually
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WD1X1413 replaces these:
AP2038389, WD01X1333, WD01X1413, WD1X1333
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Tub Baffles Disintegrated & Door Cable Broken
I used Partselect.com website to educate myself on parts needed for my model of dishwasher. Also reviewed repair instructions by others on the website and learned repair and replacement was straight forward and simple. I ordered parts from Partselect.com, they came promptly, and were the correct parts. Based on the repair instructions, I removed the fascia panel at the bottom of my dishwasher to expose the cable and spring setup for my model dishwasher, cleaned the area and installed the new parts - it took only a few minutes - then I replaced the panel and secured it with the sheet metal screws that were holding it in place. I opened the dishwasher door. My wife had already cleaned the corners of the tub where the old baffles had been, so I pressed the new baffles into place with my fingers - no tools were required for baffle installation. Dishwasher is back in service; thanks to the information, parts and prompt service provided by Partselect.com ! My wife is pleased and so am I.
Other Parts Used:
-
Melvin from Kalispell, MT
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
July 23, 2017
Any instructions on how to install the door spring?
For model number GSD600G-02
Hi John,
Thank you for your question. To replace the dishwasher door spring, you must first unscrew the mounting bracket at the top of the dishwasher from where it is secured to your counter. You may also need to unscrew and remove your kickplate at the very bottom of your dishwasher as well. Then you will carefully pull your dishwasher out of its slot to expose the dishwasher door springs. After that it is just a matter of unhooking the old springs and replacing them with the new springs.
I hope that helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS259712
Manufacturer Part Number: WD1X1413
Manufacturer Part Number: WD1X1413
Brand
Model Number
Description