Dishwasher Float
Fits your GQB7420VC159!
$12.59
Special Order
Fits your GQB7420VC159!
PartSelect Number
PS259159
Manufacturer Part Number
WD12X334
Manufactured by
GE
Troubleshooting
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint, Kenmore.
Part# WD12X334 replaces these:
AP2039135, 270642, WD12X0265, WD12X0334, WD12X265
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hoshen
February 19, 2019
How does dishwasher float work, how many parts involved p/n 151b9058 2a; dishwasher does not drain, pump ok, it is new unit, water outlet ok, filter ok, disposed ok. Best regards thanks
For model number GSD4060J00SS
Hello Hoshen, Thank you for the question. 151b9058 2a is not showing to be a valid number sorry. The water that fills your dishwasher lifts the float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher. Hope this helps, good luck with this repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Hoshen
February 19, 2019
Thanks for the previous very helpful answer. The dishwasher won't drain, could you tell me how to activate the pump to make sure the pump works, also what is the device to activate pump??thanks lot, you guys are very knowledgeable. the dishwasher is an new unit.
For model number GSD4060J00SS
Hello Hoshen, Thank you for contacting us. You can turn the knob to the end of the cycle when it would normally be draining. Very sorry but there is no device that can activate the pump. Hope this helps, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Judy
February 14, 2020
Does this model have a filter that needs to be cleaned and if so where is it located
For model number GSD2030Z04WW
Hi Judy. Yes please watch our video here: https://www.youtube.com/watch?v=IwHxJFO0I44&feature=emb_title. Thank you for your question and good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Ho
February 19, 2019
How to troubleshoot dishwasher pump? Thanks
For model number GSD4060J00SS
Hello Ho, Thank you for the question. If the Dishwasher is not pumping the water out, you can remove the pump, PartSelect Number: PS260801 and clean it out to make sure there is nothing blocking it or clogged preventing it from pumping the water out. At times if the pump is defective it will be noising and grinding. You can also watch for leaking. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
M
July 13, 2021
What is the float part 305? Do I need to replace or do maintenance to it?
For model number GSD2100V50BB
Hello M, Thank you for the question. The Float works with the Flat Switch PartSelect Number PS260235. Water that fills your dishwasher lifts this float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher. If it is damaged or missing, it will need to be replaced. We hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS259159
Manufacturer Part Number: WD12X334
Manufacturer Part Number: WD12X334
Brand
Model Number
Description