STEM FLOAT
Fits your CDW9380N00SS!
$95.85
Special Order
Fits your CDW9380N00SS!
PartSelect Number
PS259066
Manufacturer Part Number
WD12X10048
Manufactured by
GE
Troubleshooting
This part fixes the following symptoms:
Leaking | Will not fill with water
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD12X10048 replaces these:
AP3191548, 943406
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles
January 29, 2018
Replaced water inlet valve, still no water coming in. Does the float stem attach inside the float? I can lift off the float dome and the stem stays in its sleeve down onto the overfill prevent switch?
For model number PDW7800G00CC
Hi Charles,
Thank you for your question. If you have already replaced the water inlet valve, then there are other some parts that you will also need to check to see which one is causing the issue. You will need to check the flood switch, the float, the stem float and the dome float. The float stem should attach to the float. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS259066
Manufacturer Part Number: WD12X10048
Manufacturer Part Number: WD12X10048
Brand
Model Number
Description