Surface Burner Ignition Switch
Fits your EGR3000EJ2WW Range!
$105.74
Special Order
Fits your EGR3000EJ2WW Range!
PartSelect Number
PS236543
Manufacturer Part Number
WB24K10002
Manufactured by
GE
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB24K10002 replaces these:
AP2023936, 253065
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Keith
September 11, 2017
The front left burner does not light on it own. It will work if you use a match to light it. The other 3 burners light properly. Do i need part # 236543 surface burner ignition switch. Thank you
For model number J28918SEK3SS
Hi Keith,
Thank you for the question. You will need to replace the spark igniter for that burner. The spark igniters are part of the Orifice Holders so the Holder for the left front burner will need to be replaced.PartSelect Number PS1019548.
Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Ray
February 5, 2018
My oven won't light
For model number JGBS09PEH4WW
Hello Ray, thank you for your question. If the igniter is glowing, but not lighting the burner I would recommend replacing the oven igniter. If the igniter is not glowing at all, you should check the oven thermostat and the gas valve. I hope this helps!
Was this helpful?
Thank you for voting!
Brad
October 14, 2019
My igniter does not click when I turn the switch is it the switch that might need replaced or the igniter itself that might need replaced
For model number JGBP85BEJ3BB
Hello Brad, Thank you for the question. In most cases it is the Top Burner Spark Electrode, PartSelect Number PS952858. If you can turn the knob and light the burner with a match, I suggest replacing the Electrode. Hope this helps!
Was this helpful?
Thank you for voting!
Related Parts:
Larry
January 4, 2023
The burner igniter sparks, and is getting gas (burner can be match lit), but won’t light. Thank you
For model number JGBP85CEA1CC
Hello Larry, thank you for contacting us. Mostly, this kind of issue is related to a faulty spark module, part number PS231281, and to a defective ignition switch, part number PS236543. The module controls the spark for lighting the range's surface burners while the switch causes the spark ignition system to ignite the surface burner. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS236543
Manufacturer Part Number: WB24K10002
Manufacturer Part Number: WB24K10002
Brand
Model Number
Description