This dispenser housing shield kit contains genuine replacement parts. It includes the dispenser funnel, frame, spring, and the hardware you will need to install it. The funnel and frame are made out of black plastic. Before installing a new dispenser make sure you shut the water supply off and unplug the refrigerator.
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water/Ice Dispenser worked sporadically.
I used the video Parts Select referenced on YouTube, which showed a technician doing the repair. In my particular instance I did not need to remove the escutcheon around the dispenser using a putty knife or remove screws from underneath. There are two tabs in lieu of the two screws that I used a Phillips screwdriver on to push in which released the control panel. It went just as the video showed w/o a hitch. I'd like to add that this is the second time I've used Parts Select for a different appliance and thank God for their showing you what the part looks like and the videos, it helps bolster your confidence to do the repair correctly! I only wish there was more sites like this.
Other Parts Used:
Douglas from THE VILLAGES, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mush
March 12, 2018
Ordered this part and it came unassembled, just wanted to know where does the spring fit and if there is any video or a drawing . Thanks
For model number GSS25QSWSS
Hello Mush, Thank you for your inquiry. Although we do not have a repair video for this exact part number yet, we do have a video on how to replace the recess door spring for the dispenser for a similar model. Hope this helps!
https://www.youtube.com/watch?v=xIICeXtGPWs&t=10s
3 people found this helpful.
Was this helpful?
Thank you for voting!
Kristen
November 8, 2018
My lever broke to push the cup in to get the water. The part seems to be connected to the funnel. But this part that is being sold here the funnel and the lever seem to be separate. Even though it says it is compatible with my refrigerator.
For model number Pss26mstcss
Hello Kristen, Thank you for the question. Checking the model number the PartSelect Number PS2364929 is the correct part for the model number PSS26MSTCSS however GE has discontinued the original part and replaced it with this kit. It may look different in appearance but will still fit and work the same as the original parts. Hope this helps, good luck with this repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
December 10, 2019
My model number has the letter “c” instead of the “d” so my number is gsl25tcbs instead of gsl25gtdbs
Will these dispenser actuator work on my
Refrigerator?
For model number GSL25TCBS
Hello Jim and thanks for writing.
Dispenser housing shield Part Number: PS292255 is in the list of compatible items for your model. Hope this helps. Please contact us anytime.
When i put a glass in the ice/water dispenser and push it up against the dispense bar the bar pushes in softly and no noise is heard and water and ice do not dispense into the glass. The bar slowly moves back forward after the glass is removed. It's very soft and no activity is heard from the panel or seen when it is pushed in. It goes in soft and slowly comes back out when the glass is removed. I'm wondering if this is an electrical issue or a mechanical part that has broken. Not sure if it is a recess crank, torsion fit spring, door spring, micro switch or what? Thank you. Mike
For model number LSS25XSWASS
Hi Mike,
Thank you for your question. You will likely have to physically look at your dispenser parts to determine if any of your springs or recess crank is broken in any way. As far as electrically, I would suggest checking your micro switch and your dispenser solenoid. You can test both of those parts with a multi meter. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This part mounts in the ice dispenser. The crank no longer comes with this part but you can use original crank. The crank is sold separately depending on the model number of your appliance.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2364929
Manufacturer Part Number: WR49X10228