Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jay
December 6, 2017
Any instructions for installing this? Thank you.
For model number JB250RFSS
Hi Jay, Thank you for the question. When replacing the Top Broil Element you will need to unplug the appliance first. Next remove the oven racks. The element has brackets that hold it to the top of the oven cavity. The brackets are held in place by screws. There is also a bracket at the back of the oven wall where the element plugs into the back of the oven cavity. Once the screws are removed from the top and back brackets you can gently pull the element from the back of the appliance.Once the element is out of the back wall you can see the wires that push onto the terminals on the element. It is a good idea to get a clothes pin to hold the wires once they are removed from the old element so they do not fall back into the holes. Once the old element is removed you can push the wires back onto the new element and reinstall the bracket screws that hold the element in place. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
George
April 5, 2018
Is the top heating element supposed to be glowing reddish orange as the bottom heating element does ? Currently the top element gets warm but is not reddish orange in color.
For model number JBS60RF1SS
Hello George, thank you for your question. The upper element will only glow bright red when the oven is on the Broil setting. If you're using the bake function the upper element will come on and off to maintain a constant and even heat inside the oven. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
GREG
November 15, 2017
What should the oven element ohm reading be? Mine is currently reading 15 ohms.. takes a long time to heat up
For model number JB400DP4BB
Hi Greg,
Thank you for your inquiry. There should be continuity, with readings ranging from 19 to 115 ohms, however readings will vary from manufacturer to manufacturer and according to unit size and the wattage, be sure to check your manual for the manufacturer's specifications. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2359892
Manufacturer Part Number: WB44T10094