![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Drive Motor Inverter with Plastic Case
$543.55
Special Order
PartSelect Number
PS2354071
Manufacturer Part Number
WH12X10418
Manufactured by
GE
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
General Electric.
Part# WH12X10418 replaces these:
AP4421584, 1475761, WH12X10308, WH12X10335, WH12X10400, WH12X10414
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ralph
November 10, 2017
Code e16 washer starts door locks tub turns about 1/8 turn then door unlocks and machine turns off. Tub turns freely.
For model number WPDH8800J0MV
Hi Ralph, Thank you for the question. The E16 error code indicates a failure with the drive motor.According to the manual, here are a few steps to take.First Ensure all 4 shipping bolts have been removed.Remove any foreign objects that may be trapped between the spin basket and the outer plastic tub, Small clothing items can get inside. Unplug the washer and reconnect any loose wiring connections on the drive motor. If the wiring connections are okay, replace the drive motor. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ron
August 12, 2019
The error code shows e23 inverter under voltage. I don't think that the drive motor is the issue because i replaced it about four months ago. The tub spins freely by hand. Any ideas?
For model number WPDH8800J0MG
Hello Ron, thank you for contacting us. A leaking Water Valve or faulty Pump can cause this error. The replacements for your model are Water Inlet Valve part number PS1019151 and Motor and Drain Pump part number PS1766031. I hope this helps and good luck with your repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2354071
Manufacturer Part Number: WH12X10418
Manufacturer Part Number: WH12X10418
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)