Product Description
Natural Gas to Liquid Propane Conversion Kit Specifications
This kit is used to convert your appliance to liquid propane. This liquid petroleum gas conversion kit contains seven orifices, each under an inch long.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Tappan.
Part# GRLP3 replaces these:
AP4374168, 1472864, GRLP3, 316261300, 316467202, 316467203, 316542408, 7GRLP3, GRLP1, GRLP2, GRLP3, GRLP3M
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Gwyneth T - September 12, 2018
Verified Purchase
Propane conversion kit
Item arrived very fast, with very helpful instructions. Very happy with order. I will for sure shop here again.
Patrick H - August 25, 2018
Verified Purchase
Propane conversion kit .
Everything I ordered arrived within a week and worked great .
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bought a new gas oven that did not come with a propane conversion kit.
I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it is supposed to be. Then, I checked for leaks and I was then ready to cook.
Other Parts Used:
-
Denny from Bishop, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Wrench set
123 of 177 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stove was set up for natural gas and needed to be converted to LP
The LP conversion kit contained very good, detailed instructions. I replaced the gas orifices, took off the bottom door and adjusted the regulator.
Used the screwdriver to adjust the low flame and everything was done.
Used the screwdriver to adjust the low flame and everything was done.
Other Parts Used:
-
Ed from Orange, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
117 of 191 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problem, just needed to convert to LP gas.
After looking over the installation instructions I was confident that I could perform this on my own, However, changing the burner orifices was a bit tricky. Getting the original ones out worked well, they stayed in the nut driver when it was lifted. One of the new ones fell out when inserting it. Thankfully it fell all the way down and I could retrieve it. A small piece of tape was needed to keep it in the driver. The rest of the install went per instructions.
Other Parts Used:
-
Edward from Janesville, WI
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Wrench set
5 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner had no flame
Found the orifice plugged. Tried to remove the orifice for cleaning but it wrung off due to corosion caused by cleaning . Had to replace the burner mount , pipeing and install a new orifice. It was a good fix to get her small burner back but it was very expensive for parts.
Other Parts Used:
-
David from CHESNEE, SC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench set
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cornelia
February 2, 2018
What is the model number of the lp conversion kit for this range? Is it grlp3?
For model number FFGF3052TS
Hello Cornelia, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS3419381. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jaeden
December 11, 2018
Which kit should i buy to convert from ng to lp?
For model number CFCS366EC1
Hi Jaeden, thank you for your question. I have listed the correct part down below for you. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Diego
February 13, 2019
What l.P. Conversion kit is required for the Frigidaire range?
For model number LFGF3052TFB
Hello Diego, Thank you for your question. I have researched the model you have provided and have found the part you are looking for is PS3419381. Have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Michele
February 5, 2018
Need to convert back to natural gas. Is there a orifice kit
For model number FGF355AWD
Hi Michelle,
Thank you for your question. There is no conversion kit for the natural gas orifices. You will need to purchase 4 of them. The part number listed under your model number for the natural gas orifice is PS439993. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
September 28, 2017
Hi wanted to know is this kit ps2351422 for lp propane gas and the other ones is for liquid gas right i need to know right away thanks
For model number FGF337AWJ
Hi John,
Thank you for your inquiry. This kit is used to convert your appliance to liquid propane. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joanna
September 29, 2017
I am in the bahamas. I recently bought this stove from a local store, only to find out that i need a conversion kit for lp gas. I cannot find one anywhere here and have searched the internet with no results. Can you help?
For model number FFGF3015LWG
Hi Joanna,
Thank you for contacting us. We only ship within the United States. If you know of someone in the United States that we could ship the conversion kit to, then you can arrange with person to have the kit forwarded to you. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ian
April 22, 2018
Hi, i need to convert back to natural gas from lpg. Is there a kit or a list of part #s i would need? Thank you, ian
For model number FGFL67DSG
Hello Ian, thank you for your question. The natural gas orifices are part of the orifice holder and tube assemblies. You would want to order 1 of Front Burner Igniter/Orifice Assembly Part Number: PS2332312, 1 of Front Burner Igniter/Orifice Assembly - 14K Part Number: PS899768 and 2 of part number Rear Burner Igniter/Orifice Assembly Part Number: PS2342686. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
September 5, 2017
Looking for orifices to convert the stove from propane back to natural gas again. If you can tell me the orifice size i can just drill out the orifices. Thank you
For model number GLGF377ASC
Hello Gary, thank you for contacting us. We do not have the info for the size of the holes and would not recommend that since you are dealing with gas. You can purchase each orifice individually on the website listed under your model. There is no kit for it so you would have to get each separately. Good luck with the repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
John
November 20, 2018
Does this use a glp 3 or glp4? I find conflicting information
For model number LGGF3046TF
Hello John, thank you for your question. The correct conversion kit for this unit is part number GRLP4. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
NG APPLIANCES SUPPLY
February 19, 2019
Hi.Just need to know if the grlp3 is an universal conversion kit for wci ranges?. thanks.
Hello, Thank you for the question. GRLP3 is a common kit but it is not universal. They can be model specific. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2351422
Manufacturer Part Number: GRLP3
Manufacturer Part Number: GRLP3
Brand
Model Number
Description