DOOR STOP
Fits your FFHN2740PE8A!
$22.26
Special Order
Fits your FFHN2740PE8A!
PartSelect Number
PS2350624
Manufacturer Part Number
241868401
Manufactured by
Frigidaire
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Frigidaire, Electrolux, Kenmore, Crosley.
Part# 241868401 replaces these:
AP4374243, 7241868401
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Phil
July 1, 2019
The door stop located on the bottom hinges has a semi circular slot that the mounting screw goes through. If i loosen the screw and turn the stop will that stop the door from opening 180 degrees?
For model number FPBS2777RF
Hi Phil, thank you for your question. It is your door stop so moving that little lip will likely change the stop angle of your door. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Phil
July 2, 2019
In a previous answer you agreed with me on the part in question. It should be an adjustable door stop, however it does not work. I have tried it numerous times and the weight of the door just causes the part to rotate to the fully open (180 degree) position. I tried to tighten the screw down as much as possible but it still slides back. It's a poor design that should have a locking washer. I would like to try it but I am afraid if it slips eventually it will dent our doors and hit our double oven doors. When I called Frigidaire there was no one that could talk to me that has any technical background. Any suggestions?
For model number PS2350624
Hi Phil,
Thank you for your question. If you tried to adjust the door stop and it did not work, there may be something else causing the issue. Check the hinges and the door cams to see if there are any issues with them. Also, check and make sure that the refrigerator is level. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2350624
Manufacturer Part Number: 241868401
Manufacturer Part Number: 241868401
Brand
Model Number
Description