Drive Shaft Kit
Fits your A104!
$257.71
Special Order
Fits your A104!
PartSelect Number
PS2347241
Manufacturer Part Number
6-2097820
Manufactured by
Whirlpool
Product Description
Drive Shaft Kit Specifications
This kit includes the agitator drive shaft and tub seal kit. Used for 2-belt washers.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, International, Jenn-Air.
Part# 6-2097820 replaces these:
2-6712, 2-7153, 206712, 207153, 22002132
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Logan
September 5, 2019
My washer is getting grease in with the load of clothes. Does a bad agitator seal cause this? I replaced the bottom transmission seal and stopped it from leaking grease down below. Does the small rubber oring on the shaft also act as a grease seal?? i think i may also need an agitator shaft??
For model number A882 Maytag washer
Hello Logan, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS2351899. Fixing this part and leak should eliminate the grease from leaking inside the machine. Hope this helps!
Was this helpful?
Thank you for voting!
David
January 16, 2020
My washer is getting grease in with the load of clothes and makes a knocking sound during the spin cycle. What will fix this?
For model number LA7500
Hi David, thank you for your question. It may be this part that is the issue. However you may want to look at your suspension as well for the knocking noise that you are getting. Good luck with your repair.
Was this helpful?
Thank you for voting!
Nar
March 11, 2018
My drive shaft seems stuck inside the transmission and I am unable to remove it to inspect and/or replace it. Any ideas on how to remove it?
For model number A9200
Hello Nar,
Thanks for your question. You may need to use rust remover and a spanner wrench alongside a rubber mallet in order to pry out the drive shaft's nut.
I hope this helps.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2347241
Manufacturer Part Number: 6-2097820
Manufacturer Part Number: 6-2097820
Brand
Model Number
Description