Product Description
Drain Pump - 60Hz 120V Specifications
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Frigidaire Washer Drain Pump - 60Hz 120V
Troubleshooting
This part fixes the following symptoms:
Will not drain | Leaking | Not draining
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Frigidaire, Kenmore, Crosley, Gibson.
Part# 137108000 replaces these:
AP4359940, 1467804, 137108000, 131723500, 131802000, 131889800, 134051100, 134740800, 137151900, 137151900KITK
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Jessica S - June 14, 2024
Verified Purchase
Stellar experience from start to finish
The part arrived in record time, installation was relatively painless, and the washer works like new again. Many thanks!
Conrad J - April 28, 2024
Verified Purchase
Easier to fit than the original once we worked out the slight difference , quieter spin
Apart from a holdup on delivery (not your side of it ) ,the part is perfect and quieter and has a quicker and stronger washing cycle . Hope it lasts 15 years like the original !
Rick A - January 13, 2024
Verified Purchase
Easy peasy
Great diagnostics, identical match, excellent video provided step by step removal and install procedure.
Christopher H - March 8, 2023
Verified Purchase
Easy repair, fast shipping
Easy to install, and works great!
Gary G - February 22, 2023
Verified Purchase
15 min repair
Part fit perfect,could not believe how fast it arrived, it was at my doorstep in less than 24 hrs.even had short video link to make it easier, 15 min repair,love this company.
Sandra H - January 30, 2023
Verified Purchase
Easy repair
The part was exactly what I ordered easy to install great service and fast and affordable shipping . Glad we found your company will use again for sure.
Dan H - December 18, 2022
Verified Purchase
The right part and amazing shipping time
Awesome company to deal with I'm BC and within 24 hours of ordering the part I had received it and had installed and the washer was running. Wish more companies were as efficient. Dan in BC
Mark H - December 14, 2022
Verified Purchase
Exact replacement part
This part is exactly the same as the one I removed. Got it installed easily and it works great. Highly recommend.
Selene B - January 10, 2022
Verified Purchase
Son-in-law put the part in very quickly!
Took quite a bit longer to arrive as it did not come via the delivery service that we were told it would.
Scott N - January 8, 2022
Verified Purchase
Part works perfectly.
The part fit and operates perfectly. I was disappointed with the shipping process. You won't ship to a P.O. box but Canada Post delivered the item to a community box. Originally the item was to be shipped via a courier. I had to have the item sent to my Step-son's residence in Lloydminster. The item was not hazardous material and could have been sent via Canada Post since they delivered it anyway. Also, I was originally advised that I would receive it in 6 days, but in the end it took over 14 days for it to arrive. As well, if the item had been sent to my P.O. box in Alberta I would have been exempt from the Sask. Provincial Sales Tax which added another 6% to the cost of the part. Thanks for reading my rant, even though I don't expect any remuneration. Sincerely, Harvey
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 25 reviews.
What's this?
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
drain pump motor had seized as result of foreign objects
After turning off water, disconnecting power, and sucking water out of the tub and drain hose with a shop vac, I removed the front kick panel (took out two sheet metal screws). Then I removed two mounting screws from the pump assembly, and disconnected two hose clamps (inlet and outlet hoses) with a pair of pliers. Very simple, very easy. The pain in the fanny came when I tried to reattach the hoses. The hose clamps apparently require either a special tool or a technique I'm not familiar with. I finally tossed them and purchased two standard screw and band hose clamps which made the final connections a breeze. The surprise came when I found that the motor had seized because of a pair of tweezers that had somehow worked into the motor impeller. Free of tweezers and coins, the new motor works great! To quote another one of your contributors: wife happy!
Other Parts Used:
-
Charles from Raleigh, NC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Wrench set
107 of 111 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer wouldn't drain
First I turned off the breaker to the washer.
Then I removed the drain pump motor, saw that it was broken, and ordered a new one with expedited shipping. It was delivered about 36 hours later.
I should have used my wet/dry vac to suck out all of the water remaining in the drain lines. Because I didn't, nasty water dripped all over my laundry room. Lesson learned!
The part arrived at 2:20. I had to pick up my kids at school at 3pm. I wasn't sure I'd have time, but I tried anyway. I first removed the screws holding the entire pump assembly to the floor of the washer. Then I attempted to remove the clamps holding the three hoses onto the pump / motor assembly. I tried with regular pliers for about 10 minutes and finally realized I needed locking pliers. Mine are missing, but I have a stone mason doing a project at my house. I borrowed his and immediately had the clamps loosened. I slid them back onto the hoses, inserted the pump motor into each hose one by one, and reattached the clamps.
I ran a little water into the washer, checked to see that it didn't leak upon draining, then started a load and left to get my kids from school.
This was a very easy repair. The part was $75 plus about $20 for the expedited delivery. The Sears service call would have been $65 just to walk in the door PLUS whatever they would have charged me for the labor and the part. I am guessing I saved over $200.
The worst part was the gross water remaining in the drain lines. This would have been easily avoided if I'd just taken the time to get the shop vac. Learn from me and don't skip this step!!
Then I removed the drain pump motor, saw that it was broken, and ordered a new one with expedited shipping. It was delivered about 36 hours later.
I should have used my wet/dry vac to suck out all of the water remaining in the drain lines. Because I didn't, nasty water dripped all over my laundry room. Lesson learned!
The part arrived at 2:20. I had to pick up my kids at school at 3pm. I wasn't sure I'd have time, but I tried anyway. I first removed the screws holding the entire pump assembly to the floor of the washer. Then I attempted to remove the clamps holding the three hoses onto the pump / motor assembly. I tried with regular pliers for about 10 minutes and finally realized I needed locking pliers. Mine are missing, but I have a stone mason doing a project at my house. I borrowed his and immediately had the clamps loosened. I slid them back onto the hoses, inserted the pump motor into each hose one by one, and reattached the clamps.
I ran a little water into the washer, checked to see that it didn't leak upon draining, then started a load and left to get my kids from school.
This was a very easy repair. The part was $75 plus about $20 for the expedited delivery. The Sears service call would have been $65 just to walk in the door PLUS whatever they would have charged me for the labor and the part. I am guessing I saved over $200.
The worst part was the gross water remaining in the drain lines. This would have been easily avoided if I'd just taken the time to get the shop vac. Learn from me and don't skip this step!!
Other Parts Used:
-
Anita from Mission Hills, KS
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
24 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer making noise in the spin cycle:coin in pump
disconnected the power cord,removed two screws on lower front edge of machine, removed lower front cover. Got the wet vac ready to suck up the water in the rubber boots when I took the clamps off. Disconnect the pump wires, and two bolts that mounted the pump. wrestled off the boots, and cleaned out the junk in the bottom of the main boot, sucking up water as the boots came off. then reversed the process. Not bad at all. Makes you want to double check for coins so they don't destroy the pump impeller.
Other Parts Used:
-
Joseph from Somers, CT
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
23 of 25 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer vibration and noise
Vibration/Shock: remove front cover, to remove the shocks depress the tab on the locking pins and push out. Install new shocks and pin in reverse order.
Pump: Disconect power, remove front cover, slowly remove clamp from discharge side of pump and use a sponge or rag to collect water. About one pint will remain in the upper hose. Remove the upper hose after draining. Unplug the power supply to the pump and remove two screws securing the pump to the floor of the washer. Install the new pump and conect wire and hoses.
Pump: Disconect power, remove front cover, slowly remove clamp from discharge side of pump and use a sponge or rag to collect water. About one pint will remain in the upper hose. Remove the upper hose after draining. Unplug the power supply to the pump and remove two screws securing the pump to the floor of the washer. Install the new pump and conect wire and hoses.
Other Parts Used:
-
John from Swansboro, NC
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
15 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing machine wouldn't drain or spin. It would run through its cycle, but only agitate.
Use a cup to take the water out of the washer. Get at least three large towels -- you're going to have to sop up the water when you disconnect the hoses.
Take the bottom panel off (2 Phillips head screws). Drain pump is on the right side.
Remove the two screws holding the pump to the metal bottom plate. Use a small socket wrench and/or a screwdriver. I had to use a screwdriver on the right screw and a socket wrench on the left screw! Place as many towels in the cavity as you can to catch the water that's going to come out when you detach the hoses.
There is an inlet hose and an outlet hose, attached with bright green clamps. Remove those with pliers. Clean up the water that drains out. The hose in the back (inlet) has a "coin catcher" area. Clean this out.
Attach the hoses to the new pump. Screw it down. Replace the bottom panel.
Take the bottom panel off (2 Phillips head screws). Drain pump is on the right side.
Remove the two screws holding the pump to the metal bottom plate. Use a small socket wrench and/or a screwdriver. I had to use a screwdriver on the right screw and a socket wrench on the left screw! Place as many towels in the cavity as you can to catch the water that's going to come out when you detach the hoses.
There is an inlet hose and an outlet hose, attached with bright green clamps. Remove those with pliers. Clean up the water that drains out. The hose in the back (inlet) has a "coin catcher" area. Clean this out.
Attach the hoses to the new pump. Screw it down. Replace the bottom panel.
Other Parts Used:
-
Jen from Lebanon, OH
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Socket set
15 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water wouldn't drain from washing machine and clicking sound when trying to run
Used a shop vac to suck all the water through the drain hose. Removed the bottom front panel held by two screws on bottom and two plastic pins at the top. Removed electric connector on front of pump. Removed two screws holding pump down. Used pliers to move spring clips back so hoses could be removed. Put hoses on new pump and squeezed clamps with pliers to pull them back over the hose connection. The connection on the left was a little bit of a pain due to space limitations. Screwed the new pump down and reconnected the electric plug. Put the bottom cover back on and screwed it into place.
Other Parts Used:
-
Bruce from Alfred Station, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
12 of 13 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaky Drain Pump
NO EXPERIENCE NECESSARY!!
Unplug electrical.
Remove lower front panel -2 screws.
Locate drain pump in front right .
Remove electrical wiring plug - press release clip.
Remove mounting to floor - 2 screws.
Remove two hose clamps - pilers.
Mount in new part - 2 screws.
Reattach two hose clamps - pilers
* be sure hoses are fully reattached.
Attached electrical wiring plug.
Attach front panel - 2 screws
Plug in the electrical and be proud of your accomplishment because you just saved a minimum of US$200.00. Congrats.
Unplug electrical.
Remove lower front panel -2 screws.
Locate drain pump in front right .
Remove electrical wiring plug - press release clip.
Remove mounting to floor - 2 screws.
Remove two hose clamps - pilers.
Mount in new part - 2 screws.
Reattach two hose clamps - pilers
* be sure hoses are fully reattached.
Attached electrical wiring plug.
Attach front panel - 2 screws
Plug in the electrical and be proud of your accomplishment because you just saved a minimum of US$200.00. Congrats.
Other Parts Used:
-
Darrin from Cedar Rapids, IA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
9 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer wouldn't spin clothes
First thought the problem was with the spin cycle, however it soon became clear it was the pump that wasn't draining the water that kept the spin cycle from doing it's thing. After hand-wringing a large load and shopvacing out the remaining water, I ordered the new pump, got it in two days, and did a quick change out and it works perfectly. During the removal of the rubber boot that connects the tub to the pump, the one thing I did discover was a yucky buildup of years of fabric softener which I couldn't break my wife from using. But, after showing, and more importantly, letting her SMELL the fungus/mildew in the sludge, I've finally broken her of the habit! Best bang for the repair buck so far.
Other Parts Used:
-
Brian from Forest Ranch, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
pump quit working , washer was full of water!
first took off old pump off by removing 2 screws and removed 2drain hoses under front load washer with pair of pliers then put new pump on same as removal.
Other Parts Used:
-
ROBIN from BLOOMINGTON, IN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
7 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drain pump stopped working
First, I unplugged the unit, then took out the hold down screw. Next I took off both snap rings and layed towels down. Pulled off both hoses. Finally reattached in reverse order. I did not have the problem of others with the snap rings they came off easy and went back on easy.
Other Parts Used:
-
Robert from Camby, IN
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Socket set
5 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Regan
October 2, 2019
Clothes are wet and spin will not reach top speed. Hoses are clear. Pump sounds grindy do i need to replace the pump?
For model number Gltf1240as0
Hello Regan, thank you for your question. If the pump is making a grinding or squealing sound we would recommend checking the belt and pulley, and if they are in good condition the pump should be replaced. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Ronnie
December 31, 2019
Happy new year!What is the rubber pc connected straight to the 137 108 000 pump
not the pc that is connected to the left of the pump
thanks
For model number FTF530FS2
Hello Ronnie and thank you for writing.
It is called the tube assembly PS418755. We hope this helps. Please contact us anytime if you require further assistance. Have a happy New year.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Daniel
August 9, 2023
Will this model replace my existing model
Thanks
For model number 134051100
Hi Daniel, thank you for the question. Yes, this part PS2342445, replaces your drain pump with manufacturer part number 134051100. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2342445
Manufacturer Part Number: 137108000
Manufacturer Part Number: 137108000
Brand
Model Number
Description