![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)
Blower Vent Kit - Wire Harness Included
Fits your GLD4355RFS0!
$363.05
Special Order
Fits your GLD4355RFS0!
PartSelect Number
PS2334193
Manufacturer Part Number
5304467317
Manufactured by
Frigidaire
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire.
Part# 5304467317 replaces these:
AP4353774, 1461078, 154562801, 154562802, 5304467317
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 4 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Cycle wouldn't finish because of "venting" error code.
Had to pull the dishwasher all the way out, but once I removed the insulation surrounding it I found the vent on top. I removed the old vent, unplugged the old wire harness and plugged in my new one. Installation couldn't have been easier!
Other Parts Used:
-
Rex from Canton, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers
6 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
giving a vent open error
pulled dishwasher out of cabinets and replaced the vent assembly and wiring harness for vent, this was a simple replacement. after the dishwasher is out of the cabinets, unscrew the nut on the inside of the top of the tub and the vent assembly is on the outside of the tub, disconnect the wiring harness from under the bottom and reverse to install new one
Other Parts Used:
-
jeffery from fayetteville, TN
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Plastic's were melting. Error message displayed. Would not run.
I located the vent assy. on the top of the tub. I un plugged the wires from the harness. I undid the large nut form inside the tub at the top. Removed the vent assy. Put the new one in it's place. And it works perfectly and I saved over $250 doing it myself.
Other Parts Used:
-
david from marlborough, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher gave ER uo error
After reading that others had this error and had fixed it by cleaning or replacing the vent at the top back of the dishwasher, I gave it a try. Removing and cleaning the vent did not help, so I ordered and installed a new one. It was very easy! The hardest part is pulling out the washing machine! The vent has an easy to remove nut inside the washer, and taking it off on the outside merely involved detaching the wires and reattaching the wires of the new vent and putting it in place. Solved the problem, no service call!
Other Parts Used:
-
John from Tucson, AZ
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2334193
Manufacturer Part Number: 5304467317
Manufacturer Part Number: 5304467317
Brand
Model Number
Description
![Customer Service Representative](https://partselectca-dsfph5cffxaaesb6.z01.azurefd.net/images/csr-partdetail.jpg)