This is the bucket glide or bucket slide rail for your refrigerator ice maker. It connects to the wall of your freezer and allows the ice bucket to slide in and out. Your refrigerator will have a left-side and a right-side bucket glide, but this part is for the left side only. It is made of white plastic, and is sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Ice maker won’t dispense ice | Ice maker not making ice
This part works with the following products:
Refrigerator.
This part works with the following products:
General Electric, Hotpoint.
Part# WR72X10247 replaces these:
AP4345457, 1478178
Customer Repair Stories
Average Repair Rating: 4.5 / 5.0, 17 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Glide broken and wouldn't hold ice bucket motor in place.
Removed the 3 screws using a socket set. Removed 1 screw with the broken plastic piece off of the ice bucket motor by holding the broken plastic with pliers and removed screw. Be aware that the glide rail screws are standard socket size while the ice bucket motor screw was slightly larger (don't remember the exact measurements). Attached new Bucket Glide. Fixed.
Other Parts Used:
Ryan from Deltona, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Socket set
38 of 44 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stripped out helix lock, broken bucket glide rails
PITA to take apart, finally had to use two screwdrivers to pry up on the mechanism that turns the auger in order to gain access. Once I figured that out, the rest of the repair was a breeze.
When I arrived from work, the job was already done and it was installed by my 18 year old son in 15 minutes without my supervision.
Other Parts Used:
john from Peoria, AZ
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
7 of 12 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice machine quit working. Motor fell out!
1-Remove the ice bucket. 2-Nut driver 1/4 inch to remove three screws in bracket. 3-8mm nut driver to remove one screw in motor mount (where broken). Install new part. Reverse order to complete repair.
Other Parts Used:
Jared from TAYLORSVILLE, MS
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the left hand glide broke and could not support the ice bucket
I think there were 3 philip screws to remove, take off the existing glide and replace with the new part. A very simple repair and saved about 175.00 if called in a professional, Thanks Part Select
Other Parts Used:
Neal from Haverhill, MA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
torque from ice auger broke bucket glide bracket
Removed four screws from broken glide bracket and auger bracket and remove. Replaced with new glide bracket and reinserted ice bucket to connect auger with auger motor. Two socket size job.
Other Parts Used:
Donald from Henderson, NV
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
4 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left side bucket guide cracked away from the auger attachment. Could not dispense ice cubes.
Amazingly simple. I followed the directions I found on your site 4 socket screws removed. They were easily accessible. Replaced the broken bucket guide with the new part. Put the screws back in in less than 15 minutes the icemaker auger feature that dispenses the ice was back in working order.
Other Parts Used:
Michael from CHATSWORTH, CA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Left glide that ice bucket slides on broke in the rear where the ice motor connects on
I had previously removed the motor by unplugging 2 plugs and had the motor sitting on my kitchen counter awaiting for the part from the site. On receipt of the part, we removed the broken left glide, installed the new glide, re plugged the motor and attached it to the new glide. If it weren't for my hubby trying to find the right socket tool for the screws, installation would have been less than 15 minutes. The screw that attaches the glide to the ice motor is a different size than the ones that screw into the side of the fridge.
Other Parts Used:
Bridgette from MIAMI, FL
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Bucket Glide
Requires a 1/4 inch socket to remove three screws holding the glide in place and a 5/16 inch socket which attaches the drive motor to the bucket glide in the back. I described this as "really easy" rather than "very" because starting the 5/16 inch screw holding the drive motor is in a bit of tight spot.
Other Parts Used:
Lee from RENO, NV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bucket guide - Left Side broke that holds tray motor
Centered bucket guide plastic hook (notch) on back to line up screw hole of tray motor. Used socket to screw together. Without the bucket guide plastic hook this was all but impossible to line up the screw hole. When I discovered the plastic hook or notch, the process was easy! You can't see behind the motor housing to see what you are trying to do! Using the plastic notch was essential.
The fix is still working with no problems.
Other Parts Used:
Richard from JACKSON, NJ
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sergio
April 15, 2018
How are you determing the right and left side of the appliance ?
For model number CSHS5UGXCSS
Hello Sergio, thank you for your question. You determine the right and left sides of the appliance as you're standing in front of the unit, looking at it. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Meredith
July 11, 2019
The hole where the ice tray bolts into the left side of the ice maker glider broke. I cannot figure out what piece to purchase. I have a picture of that will help but it won’t let me attach here.
For model number PSS26MSWCSS
Hello Meredith, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS2323481. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2323481
Manufacturer Part Number: WR72X10247