TANK RINSE AID Assembly
Fits your HDA2100R00CC Dishwasher!
$78.99
Special Order
Fits your HDA2100R00CC Dishwasher!
PartSelect Number
PS2322305
Manufacturer Part Number
WD12X10264
Manufactured by
GE
Troubleshooting
This part fixes the following symptoms:
Will not dispense detergent | Not cleaning dishes properly
This part works with the following products:
Dishwasher.
This part works with the following products:
General Electric, Hotpoint.
Part# WD12X10264 replaces these:
AP4345792
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Rinse Agent Tank Leaks
The following steps were performed: 1) Disconnect power to the dishwasher 2) Unscrew all the screws on the inside of dishwasher door. 3) Remove outside plate on bottom of dishwasher. 4) Separate the dishwasher door after all screws are removed and pull out the old dishwasher rinse agent tank. There is a screw that needs to removed that holds the tank in place as well. 5) Snap in the new rinse agent tank and tighten screw in that holds tank in place. 6) Gently put the inside door back in place. Make sure all the holes line up correctly. 6) Put back the bottom plate of dishwasher. 7) Turn on the power again. You have now completed the repair.
Other Parts Used:
-
Paul from Lithia, FL
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
6 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
TERI
April 8, 2024
Rinse Aid cap will not screw into the reservoir. The reservoir cup is damaged somehow.
For model number HDA2100N10WW
Hi Teri, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the detergent dispenser, part number PS2322305. Good luck with your repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2322305
Manufacturer Part Number: WD12X10264
Manufacturer Part Number: WD12X10264
Brand
Model Number
Description