Radiant Element - 8 Inch
Fits your JB400SP3SS!
$110.09
Special Order
Fits your JB400SP3SS!
PartSelect Number
PS2321566
Manufacturer Part Number
WB30T10132
Manufactured by
GE
Product Description
Radiant Element - 8 Inch Specifications
This radiant stovetop element, or burner, is a genuine replacement part, and is 8 inches in diameter. The radiant element heats your cookware as you prepare food on the stovetop. To complete this repair, you will need a screwdriver to remove the screws holding the cooktop in place. Lift the cooktop up, and remove the screw and clip holding the old burner in place. Replace with the new element.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Element will not heat | Will Not Start
This part works with the following products:
Range, Wall Oven, Cooktop.
This part works with the following products:
General Electric.
Part# WB30T10132 replaces these:
AP4416172, 1536600, WB30T10128
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Back burner was not working.
Took top of stove off, disconnected the heating element, re-installed the new element and now my stove works fine.
Other Parts Used:
-
Vilas from HANOVER TWP, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
November 7, 2017
I believe I need to replace a burner element in my GE range but I can't figure out how to lift the top of the range to access it. Do you have repair instructions or a video I can view before I call a repair guy? Thank you!
For model number PD900DP2BB
Hi Doug, Thank you for the question. Before removing the cooktop, you will need to remove the control panel.The control panel contains the control board and burner switches. Remove the screws from bottom securing control panel to vent trim. Next remove the control panel insert by removing the 4 screws. Detach from main harness by unplugging the two connectors. Remove the 5 screws securing the control panel to the maintop assembly. The control panel can now be removed. The cooktop is fastened to the body with two screws. Once they are removed slide the cooktop assembly forward. Lift the cooktop up and off. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Jaspreet
December 30, 2019
Hi my one stove burner having problems. It turns on for some seconds and than shuts off automatically. Hot surface lights is on forever. So if i need to change the element how do i find a correct one?
For model number GE JCB840DKWW
Hello Jaspreet and thank you for writing.
We would need to know which burner it is. Left front, rear and so on, then we will be more than happy to find you the correct elements. Looking forward to your reply. We do carry related parts for units just like yours. For example, part number PS11772349. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Simon
July 19, 2021
Is the outside edge to edge diameter exactly 8 inches or not?
Hello Simon, Thank you for the question. The Element its self is about 9" not including the connector where the wires attached. The 8" is more for the ring shape on the glass cooktop. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Howard
March 23, 2018
The hot cook top light on my GE range won't shut off. What part do I need to correct this.
For model number JB630RF1SS
Hi Howard, Thank you for the question. If the the light will not turn off after the burner that was in use cools down, then you will need to test or replace the burner switch that controls the burner you were using at the time the light became "stuck" on. The switch controls the indicator light and the element. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bill Unger
May 13, 2019
The left front burner doesn’t seem to regulate its heats output hardly at all... for a couple of months it would primarily heat hi regardless of the setting. recently, it is going in the opposite direction as it barely heats. is replacing the burner the solution or is there some sort of thermostat elsewhere?
For model number JSP42SS NFSS
Hello Bill, thank you for your question. The most likely issue is the burner switch that regulates the burner. We would recommend testing the switch first before replacing it. The switch sits behind the knob that controls that burner. Here is the testing information. https://www.partselect.com/Range-Stove-Oven+Infinite-Switch-Testing+repair.htm. If the switch is tested and is fine, the issue would be with your element itself. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Virginia
August 21, 2019
I replaced my left front burner a few months ago but the burner is not working again. What should i consider?
For model number JB850SP3SS
Hello Virginia and thanks for writing.
You might want to take a closer look if anything is loose or came undone , then it might be just some readjusting . Please be safe and unplug appliances.
Hope this help. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Robert
October 10, 2019
The 8 inch burner pulses to red hot then back off at any temp setting including simmer, even when it is turned back off. Is this the burner or the switch?
For model number Jb640m p1bs
Hi Robert, thank you for your question. There are a couple of parts that could cause this issue specifically. You will need a multi meter to be able to test the parts. The first part you will want to check is your radiant element. It should be reading between 0 - 120 ohms to be working correctly. The other part to check would be your infinite (or surface burner) switch. When you remove that part from the appliance, connect each probe from your multi meter to the prongs and then turn the switch to an on position. If you get no continuity then the switch is the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sharon
November 15, 2019
Our burner is a 7 inch please help
For model number JB640DR3WW
Hi Sharon, the manufacturer is showing PS2321566 as the correct part for model JB640DR3WW, you may just be measuring at different points of the element. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Katha
September 24, 2017
How do I replace the element on the cook top stove
For model number JBS55DM3WW
Hi Katha, Thank you for the question. First unplug the unit or turn off the breaker. Next raise the top and take note of the terminal labeling before connecting the new part. Might be a good idea to snap a picture before you disconnect terminals. You can also remove one wire at a time and connect it to the terminal on the new part. The old element will be held in by a bracket with one screw. Once the bracket is removed the element should come right off the top. Replace the bracket with the new element. Hope this helps!
Was this helpful?
Thank you for voting!
Steve
November 23, 2019
My main burner started having a flickering off to the side so we lifted the top and found both wires connected to the burner had burnt loose, almost off, the range is nearly 8 yrs old, thanks in advance for any help or advice you may have.
For model number JBS55M2BB
Hi Steve, sadly we could not find the wiring for this model. I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- 3
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS2321566
Manufacturer Part Number: WB30T10132
Manufacturer Part Number: WB30T10132
Brand
Model Number
Description