Product Description
Evaporator Fan Assembly Specifications
This includes 2 fan blades.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Noisy | Fridge too warm
This part works with the following products:
Refrigerator.
This part works with the following products:
Amana, KitchenAid, Whirlpool, Kenmore.
Part# W10116797 replaces these:
AP4310550, 1266633, 10472401, 10855401, 10855402, 4344391, 8170446, 8189712, R0000040, W10116797, YR0000040
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Peter C - April 28, 2020
Verified Purchase
Top drawer service
Ancient Amana fridge was starting to sound like an Evinrude outboard. Removed the freezer panel and checked the fan motor and it was loose on its bearings. Apparently there are rubber grommets on the top and bottom which fit into the fan bracket assembly and hold the motor in place. Hard to see those from a visual. So bought the new motor, 1 grommet (didn’t know how many I needed) and the two blades and glad I bought two blades because only one fit. Turned power off, took out the old motor and bracket and reinstalled all. The grommet I bought was hexagonal and did not fit so just used the two old round grommets. Fridge purrs like a kitten. PartsSelect nailed it because my other option was to buy a new fridge for 2K and this cost me about $160 excluding my labor. A monkey could have done this install, as long as he could find the breaker panel.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Evaporator fan motor bearings were gone; refrigerator ran very loud as a result.
Removed panel and motor cover at rear of freezer compartment. This requires 1/4" nut driver. Removed motor assembly bracket and wiring, careful to note where ground, neutral and hot were attached. The entire assembly must be removed from the freezer compartment in order to swap new motor for old motor. Re-inserted assembly into freezer compartment, reattached wiring. Made sure all assembly screws were tightly fastened and wiring was correct. Re-attached panel cover and motor cover. I did note that a few of the 1/4" machine screws wobbled in the original holes; I used slightly larger, 5/16" head machine screws of identical length as replacements. New motor is much quieter. No longer sounds like a truck is idling in our home.
Other Parts Used:
-
Gregory from LOS ANGELES, CA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Wrench set
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ben
October 23, 2017
Freezer works but refrigerator will not get cold.
For model number 59670003000
Hi Ben, Thank you for the question.I woudl suggest checking to see if the Damper Control is opening and allowing the cold to circulate into the fresh food section. You can have someone unplug and plug in the appliance while you watch the damper to see if it is opening and closing.If the damper is working you will need to make sure the fan at the back of the freezer is running and circulating the cold air.Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Jessie
July 15, 2019
Amana ACP fan blades. Model TR21S4W-P1196102WW .
For model number TR21S4W
Hi Jessie,
Thank you for your question. The part number listed under your model number for the evaporator fan blades is PS1957154. The condenser fan blade, part number B5742604, has been discontinued by Whirlpool and you will need to contact them for information on a replacement part. Their telephone number is 1-866-698-2538. If they provide you with a part number for the replacement part, you may call us back with it and we can verify if we have it available for you. You may also be able to locate the part you need by trying the following:
Using a search engine to type your part number and see if other retailers still have this part in stock.
Visiting online stores such as eBay and finding sellers that have this part.
Trying retailers and repair stores in your local area to see if they have the part in their inventory.
Talking to a local repair technician, who may have the part you need, or may be able to repair your existing part. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS1957154
Manufacturer Part Number: W10116797
Manufacturer Part Number: W10116797
Brand
Model Number
Description